Air Dryer - Remove and Install
Removal Procedure
Show/hide table
 |
Personal injury can result from removing hoses or fittings in a pressure system. Failure to relieve pressure can cause personal injury. Do not disconnect or remove hoses or fittings until all pressure in the system has been relieved. |
 |
Note: Put identification marks on all hoses, on all hose assemblies on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and plug all tube assemblies. This helps prevent fluid loss, and this helps keep contaminants from entering the system.
- Open valves (1) in order to release the system air pressure.
Show/hide table
 | |
| Illustration 1 | g01252230 |
- Open cover (2) .
Show/hide table
 | |
| Illustration 2 | g01257738 |
- Disconnect hose assemblies (4). Disconnect harness assembly (5). Disconnect hose (7) .
Show/hide table
 | |
| Illustration 3 | g01257740 |
- Remove bolts (6). Remove air dryer (3) .
Installation Procedure
- Position air dryer (3) and install bolts (6) .
Show/hide table
| | |
| Illustration 4 | g01257740 |
- Connect hose (7). Connect harness assembly (5). Connect hose assemblies (4) .
- Close cover (2) .
Show/hide table
| | |
| Illustration 5 | g01257738 |
- Close valves (1) .
Show/hide table
| | |
| Illustration 6 | g01252230 |
Caterpillar Information System:
990H Wheel Loader Sound Information and Vibration Information
Air Conditioning and Heating R134a for All Caterpillar Machines System Capacities for Refrigerant (Track-Type Loaders)
Air Conditioning and Heating R134a for All Caterpillar Machines System Capacities for Refrigerant (Track-Type Tractors)
D3K, D4K and D5K Track-Type Tractors Backup Alarm
Bench Test Procedure For A 615 And 615C Wheel Tractor-Scraper Transmission{3030, 3073} Bench Test Procedure For A 615 And 615C Wheel Tractor-Scraper Transmission{3030, 3073}
D3K, D4K and D5K Track-Type Tractors Reference Material
C27 and C32 Engines for Caterpillar Built Machines E1000 High Left Intake Manifold Air Temperature
C27 and C32 Engines for Caterpillar Built Machines E540 Low Engine Oil Refill Tank Level
2006/03/27 Replace the Fuel Injector Hold-Down Bolt When You Service the Electronic Unit Injectors on Engines, Including Remanufactured Engines with Serial Number Prefix 3LZ, AKB, ALS or R1D {1251, 1254}
854K Wheel Dozer Transmission Magnetic Screen - Clean
C27 and C32 Engines for Caterpillar Built Machines E171 Low Engine Oil Level
2006/08/07 An Improved Muffler is now Used {1062}
D6R Series III, D6T and D7R Series II Track-Type Tractors Service Tools
844H Wheel Dozer Machine Systems Tilt and Tip Cylinder - Remove and Install
844H Wheel Dozer Machine Systems Lift Cylinder - Remove and Install
973C Does Not Track Straight While Digging{3174, 3203} 973C Does Not Track Straight While Digging{3174, 3203}
12M, 140M and 160M Motor Graders Hydraulic and Steering System Pump Efficiency (Piston Pumps) - Test
844H Wheel Dozer Machine Systems Pilot Operated Hydraulic Control (Joystick) - Disassemble
844H Wheel Dozer Machine Systems Pilot Operated Hydraulic Control (Joystick) - Assemble
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) General Information
844H Wheel Dozer Machine Systems Main Control Valve - Disassemble
844H Wheel Dozer Machine Systems Main Control Valve - Assemble
844H Wheel Dozer Machine Systems Main Control Valve - Remove
844H Wheel Dozer Machine Systems Main Control Valve - Install