Main Control Valve - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 138-7575 | 连杆支架 | 1 |
开始:
- 连接转向机架锁。 请参阅拆解和组装, "转向机架锁 - 分离和连接"。
- 释放液压系统压力。 请参阅拆解和组装, "系统压力 - 释放"。
Show/hide table
 |
热油和热的部件可能会导致人员受伤。 请勿让热的液压油或热的零部件与皮肤接触。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品，参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
注: 为便于安装，在所有管路、所有软管、所有导线及所有导线上做出识别标记。 塞住所有管子和所有软管。 这将有助于防止液体泄漏和污染物进入系统。
- 从机具和制动系统的液压油箱将机油排入适当的容器以便保存或合适的废弃处理。
- 拆下端盖组件 (1) 。
Show/hide table
 | |
| 图 1 | g00883233 |
- 从主控制阀 (4) 断开线束组件 (2) 和软管组件 (3) 。
Show/hide table
 | |
| 图 2 | g01257964 |
- 将工具 (A) 和适当的起吊设备连接到主控制阀 (4) 。 主控制阀 (4) 的重量约为 77 kg (170 lb)。
Show/hide table
 | |
| 图 3 | g01257954 |
- 从主控制阀 (4) 的每侧拆卸安装螺栓 (5) 并拆卸主控制阀 (4) 。
Caterpillar Information System:
844H Wheel Dozer Machine Systems Main Control Valve - Assemble
844H Wheel Dozer Machine Systems Main Control Valve - Disassemble
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) General Information
844H Wheel Dozer Machine Systems Pilot Operated Hydraulic Control (Joystick) - Assemble
844H Wheel Dozer Machine Systems Pilot Operated Hydraulic Control (Joystick) - Disassemble
12M, 140M and 160M Motor Graders Hydraulic and Steering System Pump Efficiency (Piston Pumps) - Test
973C Does Not Track Straight While Digging{3174, 3203} 973C Does Not Track Straight While Digging{3174, 3203}
844H Wheel Dozer Machine Systems Lift Cylinder - Remove and Install
844H Wheel Dozer Machine Systems Tilt and Tip Cylinder - Remove and Install
D6R Series III, D6T and D7R Series II Track-Type Tractors Service Tools
631G and 637G Wheel Tractor-Scrapers Machine Systems Air Dryer - Remove and Install
990H Wheel Loader Sound Information and Vibration Information
844H Wheel Dozer Machine Systems Main Control Valve - Install
993K Wheel Loader Engine Crankcase Breather - Clean
2006/03/27 Correction to Specifications , "Main Control Valve" {5051}
854K Wheel Dozer Machine Systems Pilot Operated Hydraulic Control (Joystick) - Remove
844H Wheel Dozer Machine Systems Pilot Operated Hydraulic Control (Joystick) - Install
C9.3 Tier 4 Final Engines Coolant Temperature Sensor
D7R Series 2 Track-Type Tractor Machine Systems Cab Mounting
844H Wheel Dozer Machine Systems Selector and Pressure Control Valve (Secondary Steering) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Engine Fan Control Solenoid Circuit - Test
2006/05/29 New Articulated Mirror Supports Being Used {7319}
844H Wheel Dozer Machine Systems Front Frame from Rear Frame - Separate
844H Wheel Dozer Machine Systems Front Frame to Rear Frame - Connect