Main Control Valve - Install
安装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 138-7575 | 连杆支架 | 1 |
- 使用工具 (A) 和适当的起吊设备，将主控制阀 (4) 安置在机器上。 主控制阀 (4) 的重量约为 77 kg (170 lb)。
Show/hide table
 | |
| 图 1 | g01257954 |
- 将安装螺栓 (5) 安装在主控制阀 (4) 的两侧。
- 连接软管组件 (3) 和线束组件 (2) 。
Show/hide table
 | |
| 图 2 | g01257964 |
- 安装盖组件 (1) 。
Show/hide table
 | |
| 图 3 | g00883233 |
- 将机具和制动系统液压油箱加注至正确油位。 请参阅操作和保养手册, "加注容量"。
End By: 分离转向机架锁。 请参阅 拆解和组装, "转向机架锁 - 分离和连接"。
Caterpillar Information System:
844H Wheel Dozer Machine Systems Main Control Valve - Remove
844H Wheel Dozer Machine Systems Main Control Valve - Assemble
844H Wheel Dozer Machine Systems Main Control Valve - Disassemble
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) General Information
844H Wheel Dozer Machine Systems Pilot Operated Hydraulic Control (Joystick) - Assemble
844H Wheel Dozer Machine Systems Pilot Operated Hydraulic Control (Joystick) - Disassemble
12M, 140M and 160M Motor Graders Hydraulic and Steering System Pump Efficiency (Piston Pumps) - Test
973C Does Not Track Straight While Digging{3174, 3203} 973C Does Not Track Straight While Digging{3174, 3203}
844H Wheel Dozer Machine Systems Lift Cylinder - Remove and Install
844H Wheel Dozer Machine Systems Tilt and Tip Cylinder - Remove and Install
D6R Series III, D6T and D7R Series II Track-Type Tractors Service Tools
631G and 637G Wheel Tractor-Scrapers Machine Systems Air Dryer - Remove and Install
993K Wheel Loader Engine Crankcase Breather - Clean
2006/03/27 Correction to Specifications , "Main Control Valve" {5051}
854K Wheel Dozer Machine Systems Pilot Operated Hydraulic Control (Joystick) - Remove
844H Wheel Dozer Machine Systems Pilot Operated Hydraulic Control (Joystick) - Install
C9.3 Tier 4 Final Engines Coolant Temperature Sensor
D7R Series 2 Track-Type Tractor Machine Systems Cab Mounting
844H Wheel Dozer Machine Systems Selector and Pressure Control Valve (Secondary Steering) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Engine Fan Control Solenoid Circuit - Test
2006/05/29 New Articulated Mirror Supports Being Used {7319}
844H Wheel Dozer Machine Systems Front Frame from Rear Frame - Separate
844H Wheel Dozer Machine Systems Front Frame to Rear Frame - Connect
Installation of the 288-6536 Control Valve Conversion Gp (Third Valve Kit){5051} Installation of the 288-6536 Control Valve Conversion Gp (Third Valve Kit){5051}