Steering Wheel (Command Control Steering) - Remove and Install
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 145-5242 | 拉拔器 | 1 |
开始:
- 连接转向机架锁。 请参阅拆解和组装, "转向机架锁 - 分离和连接"。
- 将喇叭按钮 (1) 从方向盘 (2) 上拆下。 必要时，利用螺丝刀撬出喇叭按钮。
Show/hide table
 | |
| 图 1 | g00451503 |
- 将线束组件 (5) 从喇叭按钮 (1) 上断开。
Show/hide table
 | |
| 图 2 | g00451504 |
- 拆下螺母 (3) 、隔套 (4) 和操纵杆 (6) 。
注: 标出操纵杆 (6) 的位置，以便于组装。
- 拆下螺栓 (8) 。 将护罩 (7) 沿转向柱滑下。
Show/hide table
 | |
| 图 3 | g00842667 |
- 松开固定螺母 (9) 。
Show/hide table
 | |
| 图 4 | g00451506 |
Show/hide table
 | |
| 图 5 | g00451507 |
- 利用工具 (A) 松开方向盘 (2) 。 拆下固定螺母 (9) 。
注: 标出方向盘的位置，以便于组装。
- 提起方向盘 (2) 。
Show/hide table
 | |
| 图 6 | g00451508 |
- 断开线束组件 (10) 和线束组件 (11) 。
- 拆下方向盘 (2) 。
安装步骤
- 撑住方向盘 (2) 。
Show/hide table
| | |
| 图 7 | g00451508 |
- 连接线束组件 (11) 和线束组件 (10) 。
- 将方向盘 (2) 装入原位。
Show/hide table
| | |
| 图 8 | g00451506 |
- 安装固定螺母 (9) 。 固定螺母 (9) 的扭矩为 50 ± 4 N·m (37 ± 3 lb ft)。
- 将护罩 (7) 滑到原位。 安装螺栓 (8) 。
Show/hide table
| | |
| 图 9 | g00842667 |
- 将操纵杆 (6) 装入原位。 安装隔套 (4) 和螺母 (3) 。
Show/hide table
| | |
| 图 10 | g00451504 |
- 将线束组件 (5) 连接到喇叭按钮 (1) 上。
- 将喇叭按钮 (1) 安装到方向盘 (2) 上。
Show/hide table
| | |
| 图 11 | g00451503 |
End By: 分离转向机架锁。 请参阅 拆解和组装, "转向机架锁 - 分离和连接"。
Caterpillar Information System:
657G Wheel Tractor-Scraper Differential and Final Drive Oil - Change
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0497 - FMI 05
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0497 - FMI 03
904B Wheel Loader Power Train Oscillating Axle (Rear)
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0490 - FMI 04
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0490 - FMI 03
657G Wheel Tractor-Scraper Differential and Final Drive Breather - Clean
854G Wheel Dozer Maintenance Interval Schedule
992G Wheel Loader Maintenance Interval Schedule
904B Wheel Loader Engine Supplement Water Pump - Remove and Install
953C Track-Type Loader Front Idler Position - Check
904B Wheel Loader Power Train Worksheets
2005/04/04 New Software with Improved Neutralizer Function Is Now Used {7620}
631G Wheel Tractor-Scraper Engine Oil and Filter - Change
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0497 - FMI 06
627G Wheel Tractor-Scraper Engine Supplement Water Pump - Remove
627G Wheel Tractor-Scraper Engine Supplement Water Pump - Install
627G Wheel Tractor-Scraper Engine Supplement Fan Drive - Remove
627G Wheel Tractor-Scraper Engine Supplement Fan Drive - Install
657G Wheel Tractor-Scraper Differential and Final Drive Oil Level - Check
2005/04/11 Special Instruction, REHS2615 , "New Winch Control Improves the Free Spool Mechanism on Wheel Skidders" is Available {5163}
966H and 972H Wheel Loaders Machine Systems Steering Neutralizer Valve (Command Control Steering) - Remove
966H and 972H Wheel Loaders Machine Systems Steering Neutralizer Valve (Command Control Steering) - Install
966H and 972H Wheel Loaders Machine Systems Steering Neutralizer Valve (Command Control Steering) - Disassemble