Transmission, Input Transfer Gears and Output Transfer Gears - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件说明     | 数量     |
A     | 6v-3145     | 均载梁     | 1     |
B     | 138-7574     | 连杆支架     | 4     |
ZZ     | 6V-9828     | 盖组件     | 7     |
6V-9507 | 插头     | 7     | |
6 V | 盖组件     | 5     | |
6 V | 插头     | 5     | |
6V-9830 | 盖组件     | 1     | |
6V-9509 | 插头     | 1     | |
6V-9831 | 盖组件     | 1     | |
6V-9510 | 插头     | 1     | |
6V-9832 | 盖组件     | 1     | |
6V-9511 | 插头     | 1     | |
9U-7082 | 锥形管盖/管塞     | 2     | |
9U-7084 | 锥形管盖/管塞     | 7     | |
9U-7085 | 锥形管盖/管塞     | 1     | |
9U-7087 | 锥形管盖/管塞     | 1     |
开始:
- 卸下驾驶室。 请参阅拆解和组装, "驾驶室 - 拆卸"。
- 拆卸输入传动轴。 请参阅拆解和组装, "输入传动轴 - 拆卸"。
- 卸下后驱动轴。 请参阅拆解和组装, "驱动轴(后)- 拆卸"。
- 卸下中心驱动轴。 请参阅拆解和组装, "驱动轴(中心)- 拆卸"。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
注: 维修数据:拆卸和安装中的工具 (ZZ) 将不在图示中列出。 显示这一工具是为了协助有经验的维修人员。
注: 在所有软管、所有软管组件、所有导线及所有管组件上作出识别标记,以便安装。 插接好所有软管组件和所有管组件。 这将有助于防止液体渗漏,并有助于防止污染物进入系统。
- 断开软管组件 (1) 、 (2) 和 (3) 。
Show/hide table
图 1 | g01140625 |
- 断开软管组件 (4) 。
Show/hide table
图 2 | g01140709 |
- 断开软管组件 (5) 和 (6) 。
Show/hide table
图 3 | g01140725 |
- 断开软管组件 (7) 、 (8) 、 (9) 、 (10) 、 (11) 、 (12) 、 (13) 和 (14) 。
Show/hide table
图 4 | g01140730 |
- 拆下螺栓 (15) 。
Show/hide table
图 5 | g01140739 |
- 将管组件 (16) 从液压油箱的背面拆下。
Show/hide table
图 6 | g01140745 |
- 拆下螺栓 (17) 和夹子。
Show/hide table
图 7 | g01140841 |
- 断开软管 (18) 。
Show/hide table
图 8 | g01140843 |
- 断开软管组件 (19) 和 (20) 。
Show/hide table
图 9 | g01140845 |
- 断开软管组件 (21) 。
Show/hide table
图 10 | g01140853 |
- 拆下卡箍 (22) 、 (24) 和 (27) 。 拆下软管组件 (25) 。 将软管组件 (23) 和 (26) 放到一边。
Show/hide table
图 11 | g01140900 |
- 拆下螺栓 (29) 和夹子。 断开线束组件 (28) 和 (30) 。 将线束组件 (28) 和 (30) 定位到变速箱上。
Show/hide table
图 12 | g01140909 |
- 拆下螺栓 (31) 和夹子。
Show/hide table
图 13 | g01140912 |
- 断开软管组件 (32) 。 断开管组件 (33) 。 拆下螺栓 (34) 和夹子。 取下壳体 (35) 。
Show/hide table
图 14 | g01140919 |
- 断开软管组件 (36) 。 拆下螺栓 (37) 和管组件 (33) 。
Show/hide table
图 15 | g01140927 |
- 拆下弯头 (38) 和 (39) 。
Show/hide table
图 16 | g01140938 |
- 断开管组件 (40) 。
Show/hide table
图 17 | g01140940 |
- 将工具 (A) 、工具 (B) 和适当的起吊设备固定到变速箱 (41) 上。 变速箱 (41) 的重量约为 1406 kg (3100 lb)。
Show/hide table
图 18 | g01140953 |
Show/hide table
图 19 | g01140944 |
- 拆下螺栓 (42) 和 (44) 。 拆下安装板 (43) 。 对另一侧重复此操作。
Show/hide table
图 20 | g01140952 |
- 拆下螺栓 (45) 和 (46) 。 拆下安装板 (47) 。 拆下变速箱 (41) 。
Show/hide table
图 21 | g01140975 |
Caterpillar Information System:
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System MID 082 - CID 1964 - FMI 01
D8T, D9T, D10T and D11T Track-Type Tractors Machine Movement - D10T
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201} Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
988H and 988K Wheel Loaders Power Train Transmission Planetary - Assemble
2005/02/21 Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
C27 Engines for Track-Type Tractors Event Codes
D8T Track-Type Tractor Power Train Track Roller - Remove
C15 and C18 Engines for Caterpillar Built Machines Engine Shutdown Switch Circuit - Test
994F Wheel Loader Hydraulic System Implement Cycle Time - Check
994F Wheel Loader Hydraulic System Lift and Tilt Cylinder Drift - Check
994F Wheel Loader Hydraulic System System Pressure - Release
994F Wheel Loader Braking System Monitoring System (Brake Functions)
C11 and C15 Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
2005/03/21 New Engine Software Provides the Engine Idle Management System {1901, 1902, 7620}
2005/01/31 Hardened Inserts Are Now Available for the Bucket Pin Bores {6107, 6109}
2005/02/07 An Improved Hydraulic Oil Cooler Is Now Available for Machines that Are Equipped with Axle Oil Coolers {1365, 1374}
2005/02/07 A New High Capacity Battery Is Now Available {1401}
C11 and C15 Engines for Caterpillar Built Machines Digital Sensor Supply Circuit - Test
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System MID 082 - CID 1964 - FMI 03
C15 and C18 Engines for Caterpillar Built Machines Sensors and Electrical Connectors
966H and 972H Wheel Loaders Machine Systems Piston Pump (Brake, Hydraulic Fan) - Disassemble
966H and 972H Wheel Loaders Machine Systems Piston Pump (Brake, Hydraulic Fan) - Assemble
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System MID 082 - CID 1964 - FMI 04
994F Wheel Loader Braking System Gear Pump (Brake Cooling)