C-9 Industrial Engine Caterpillar


Safety Messages

Usage:

C-9 CLJ
There may be several specific safety messages on your engine. The exact location and a description of the safety messages are reviewed in this section. Please become familiar with all safety messages.

Ensure that all of the safety messages are legible. Clean the safety messages or replace the safety messages if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap to clean the safety messages. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety messages. The safety messages that are loosened could drop off of the engine.

Replace any safety message that is damaged or missing. If a safety message is attached to a part of the engine that is replaced, install a new safety message on the replacement part. Your Caterpillar dealer can provide new safety messages.

------ WARNING! ------

Do not operate or work on this engine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.


The safety messages that may be found on the engine are illustrated and described.

Starting Aid



Illustration 1g00780729
(1) Valve cover
(2) Hydraulic Pump

The safety message for the starting aid is located on the flat portion of the valve cover.



Illustration 2g00283559

If the engine is equipped with an air inlet heater for cold weather starting, the optional ether injection system is the only starting system that is recommended. Do not use starting aids that contain aerosols. Using such types of starting aids could result in an explosion and personal injury.

Clutch



Illustration 3g00107406

The safety message for the clutch is located on the clutch housing (if equipped).



Illustration 4g00107407

Rotating gears can cause entanglement of the fingers. Rotating gears can cause entanglement of the hands. Do not service this component without first reading the operator manual.

Engine Lifting



Illustration 5g00367054

The safety message for lifting the engine with a fuel tank is located on the fuel tank (if equipped).



Illustration 6g00100728

------ WARNING! ------

Lift eyes or tank can fail when lifting tank containing fluids resulting in possible personal injury. Drain tank of all fluids before lifting.


Caterpillar Information System:

C32 Petroleum Engines Engine Oil Pan - Remove and Install
C27 and C32 Generator Set Engines Engine Design
C27 and C32 Generator Set Engines Cat Data Link Circuit - Test
3516B Off-Highway Trucks Electrical Connectors and Functions
2005/10/03 Responsibilities for Emission Certified Engines {1000}
C3.4B Engines for Caterpillar Built Machines Excessive Engine Oil Consumption - Inspect
C6.6 Engines for Caterpillar Built Machines Increased Engine Oil Temperature - Inspect
C7.1 Engines for Caterpillar Built Machines Cooling System - Test
C7.1 Engines for Caterpillar Built Machines Water Temperature Regulator - Test
C7 Industrial Engine Reference Material
C7 Industrial Engine Diagnostic Flash Code Retrieval
C7 Industrial Engine Refill Capacities and Recommendations
C6.6 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
C6.6 Engines for Caterpillar Built Machines Fuel Quality - Test
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Connecting Rod
C15 and C18 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
C32 Petroleum Engines Atmospheric Pressure Sensor - Remove and Install
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Exhaust Temperature Is Too High
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Charging System - Test
793D Off-Highway Truck Power Train Liquid Level Switch (Torque Converter Oil)
C27 and C32 Generator Set Engines Speed Control (Switch) - Test
3500C Marine Engines Engine Design
TH48-E80 Petroleum Transmission Power Train Electronic Control System Lockup Clutch Disable Function
TH48-E80 Petroleum Transmission Power Train Electronic Control System Quick To Neutral Function
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.