Manual Ball Valve (Counterweight Circuit) - Install
安装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件说明     | 数量     |
A     | FT-2674     | 真空舱     | 1     |
- 将手动球阀组件 (3) 安装到位。 安装支架 (2) 。 将软管组件 (1) 连接至手动球阀组件 (3) 。
Show/hide table
图 1 | g01206124 |
- 关闭机器右后侧的检修门。
- 从液压油箱上卸下工具 (A) 。
Show/hide table
图 2 | g01204278 |
Caterpillar Information System:
C1.5 and C2.2 Generator Set Engines Generator - Remove
G3304 and G3306 Engines Electric Starting Motor
325D and 329D Excavators and 325D Material Handler Machine System Specifications Relief Valve (Pilot) - Front Lines
C175 Generator Set Engines Piston Cooling Jets - Remove and Install
C7 and C9 On-highway Engines Engine Operation
C15 Engine Refill Capacities and Recommendations
G3500 A3 Engines Engine Monitoring System - Oxygen Feedback
C15 Engine Information Plate
C15 Engine Serial Number Plate
345C MHPU Mobile Hydraulic Power Unit Machine Systems Pilot Valve (Travel) - Assemble
C15 Engine Engine Description
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
C13 and C15 On-Highway Engines Reference Material
G3500 A3 Engines System Configuration Parameters - Oxygen Feedback
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Counterweight Circuit) - Install
C1.5 and C2.2 Generator Set Engines Generator - Install
Installation and Initial Start-Up Procedure for G3500 A3 Engines {1000} Installation and Initial Start-Up Procedure for G3500 A3 Engines {1000}
C15 Engine Electronics Grounding Stud - Inspect/Clean/Tighten
C15 Engine Engine Crankcase Breather - Clean
C15 Engine Maintenance Interval Schedule
C7.1 Engines for Caterpillar Built Machines Lubrication System
2005/10/03 Responsibilities for Emission Certified Engines {1000}
C27 and C32 Engines Fuel System
C7.1 Engines for Caterpillar Built Machines Water Temperature Regulator and Housing