Brake Accumulator - Check
- Start the engine and run the engine at low idle.
- Allow the engine to idle for at least 2 minutes to charge the accumulators fully.
Show/hide table
Illustration 1 | g01101739 |
Note: The brake oil pressure indicator light (1) should come on when the engine is started. The indicator light should turn off when the braking system reaches normal operating pressure.
- Turn the engine start switch to the OFF position.
- Turn the engine start switch to the ON position but do not start the engine.
- Depress the service brake pedal for at least five applications until the indicator light comes on.
- If the indicator light comes on after less than five applications, check the nitrogen precharge pressure of the brake accumulator. Consult your Cat dealer for the proper tools.
Note: To discharge the brake accumulator completely, depress the service brake pedal for at least 30 applications.
Caterpillar Information System:
525C, 535C and 545C Wheel Skidders Stopping the Engine
525C, 535C and 545C Wheel Skidders Engine and Machine Warm-Up
525C, 535C and 545C Wheel Skidders Parking Brake
525C, 535C and 545C Wheel Skidders Secondary Steering - If Equipped
980H Wheel Loader Power Train Torque Converter (Freewheel Stator)
C11 and C13 Engines Engine Oil Filter Base
980H Wheel Loader Machine Systems Hydraulic Tank - Disassemble
980H Wheel Loader Power Train Engine and Transmission Support Group
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
Machine Security System Electrical Component and Connector Locations
980H Wheel Loader Machine Systems Counterweight - Remove and Install
Machine Security System System Components
525C, 535C and 545C Wheel Skidders Transmission Oil - Change
525C, 535C and 545C Wheel Skidders Transmission Oil Filter - Replace
2004/10/04 Serviceable Parts for the Gear Pump Now Available {5073}
AccuGrade Laser System Display Icons
D9T Track-Type Tractor Machine Systems Piston Motor (Hydraulic Fan) - Remove
966H and 972H Wheel Loaders Hood Tilt
966H and 972H Wheel Loaders Roading Fender Control - If Equipped
980H Wheel Loader Machine Systems Hydraulic Tank - Assemble
D9T Track-Type Tractor Machine Systems Piston Motor (Hydraulic Fan) - Install
C15 and C18 Generator Set Engines Engine Oil Pump - Disassemble
C15 and C18 Generator Set Engines Engine Oil Pump - Assemble
D9T Track-Type Tractor Engine Supplement Vibration Damper and Pulley - Remove and Install