Electric Starting Motor
Show/hide table
 | |
| 图 1 | g03366944 |
Show/hide table
| 352-9765 电起动马达总成 和 150-8867 电起动马达总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 2 | 6V-8188 螺母 | 最终安装扭矩为 30.5 ± 3.5 N·m (269.9 ± 30.9 lb in)。 |
| B | - | - | 小齿轮和壳体之间的间隙为 9.1 mm (0.36 in)。 |
| 2 | 1 | 4B-2049 螺母 | 最终安装扭矩为 3.4 ± 1.2 N·m (30.1 ± 10.6 lb in)。 |
| 3 | 1 | 4B-2049 螺母 | 开关接线端。 开关端子必须用热收缩管绝缘。 不要使用模压端子。 最终安装扭矩为 3.4 ± 1.2 N·m (30.1 ± 10.6 lb in)。 |
| 4 | 1 | 6V-8188 螺母 | 接地终端。 最终安装扭矩为 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in)。 |
| 5 | 1 | 6V-8188 螺母 | 蓄电池终端。 蓄电池端子螺母最多可使用三条电缆或导线端子。 两个电缆接线端可以等于或高于 0 AWG。 拧紧至扭矩为 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in)。 |
| 6 | - | - | 马达机架终端。 拧紧至扭矩为 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in)。 |
| - | - | - | 10 V 和 20° C (68° F) 时的吸合电流为 82.0 至 94.2 安培。 |
| 10 V 和 20° C (68° F) 时的保持电流最大为 16.4 安培。 |
|||
| - | - | - | 当从小齿轮端观看电起动马达时，马达顺时针旋转。 |
| - | - | - | 25 °C (77 °F) 时无负载： |
| 转速为 4600 至 7100 rpm。 | |||
| 电流为 210 至 305 安培。 | |||
| 电压为 11 VDC。 | |||
Caterpillar Information System:
Machine Security System Electrical Component and Connector Locations
980H Wheel Loader Machine Systems Counterweight - Remove and Install
Machine Security System System Components
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine and Transmission Support Group
Machine Security System Normal Operation
D10R Track-Type Tractor Power Train Bevel and Transfer Gears - Assemble
980H Wheel Loader Machine Systems Hydraulic Tank - Install
390F MHPU Mobile Hydraulic Power Unit Circuit Breakers - Reset
Machine Security System General Information
D10T Track-Type Tractor Power Train Transmission and Bevel Gears - Install
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Temperature Sensor (Torque Converter Oil)
930H Wheel Loader Steering System Solenoid Valve (Quick Steer)
980H Wheel Loader Power Train Engine and Transmission Support Group
980H Wheel Loader Machine Systems Hydraulic Tank - Disassemble
C11 and C13 Engines Engine Oil Filter Base
980H Wheel Loader Power Train Torque Converter (Freewheel Stator)
525C, 535C and 545C Wheel Skidders Secondary Steering - If Equipped
525C, 535C and 545C Wheel Skidders Parking Brake
525C, 535C and 545C Wheel Skidders Engine and Machine Warm-Up
525C, 535C and 545C Wheel Skidders Stopping the Engine
525C, 535C and 545C Wheel Skidders Brake Accumulator - Check
525C, 535C and 545C Wheel Skidders Transmission Oil - Change
525C, 535C and 545C Wheel Skidders Transmission Oil Filter - Replace
2004/10/04 Serviceable Parts for the Gear Pump Now Available {5073}