Stopping the Engine
Show/hide table
| NOTICE |
|---|
|
Stopping the engine immediately after it has been working under load, can result in overheating and accelerated wear of the engine components. Refer to the following procedure, to allow the engine to cool, and to prevent excessive temperatures in the turbocharger housing (if equipped), which could cause oil coking problems. |
- While the machine is stopped, operate the engine for five minutes at low idle. This allows hot areas in the engine to cool gradually. Also, this will allow the turbocharger shaft to slow down.
Show/hide table
Illustration 1 g01100951 (1) OFF position. (2) ON position. (3) START position. - Turn the engine start switch to the OFF position in order to stop the engine.
Caterpillar Information System:
525C, 535C and 545C Wheel Skidders Engine and Machine Warm-Up
525C, 535C and 545C Wheel Skidders Parking Brake
525C, 535C and 545C Wheel Skidders Secondary Steering - If Equipped
980H Wheel Loader Power Train Torque Converter (Freewheel Stator)
C11 and C13 Engines Engine Oil Filter Base
980H Wheel Loader Machine Systems Hydraulic Tank - Disassemble
980H Wheel Loader Power Train Engine and Transmission Support Group
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
Machine Security System Electrical Component and Connector Locations
980H Wheel Loader Machine Systems Counterweight - Remove and Install
Machine Security System System Components
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine and Transmission Support Group
525C, 535C and 545C Wheel Skidders Brake Accumulator - Check
525C, 535C and 545C Wheel Skidders Transmission Oil - Change
525C, 535C and 545C Wheel Skidders Transmission Oil Filter - Replace
2004/10/04 Serviceable Parts for the Gear Pump Now Available {5073}
AccuGrade Laser System Display Icons
D9T Track-Type Tractor Machine Systems Piston Motor (Hydraulic Fan) - Remove
966H and 972H Wheel Loaders Hood Tilt
966H and 972H Wheel Loaders Roading Fender Control - If Equipped
980H Wheel Loader Machine Systems Hydraulic Tank - Assemble
D9T Track-Type Tractor Machine Systems Piston Motor (Hydraulic Fan) - Install
C15 and C18 Generator Set Engines Engine Oil Pump - Disassemble
C15 and C18 Generator Set Engines Engine Oil Pump - Assemble