Muffler - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 1     |
Start By:
- Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Show/hide table
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool. |
- Remove angle (1). Disconnect tube assembly (4) from muffler (3) .
Show/hide table
Illustration 1 | g01089240 |
- Remove bolts (2). Remove bracket assembly (5) .
- Attach Tooling (A) and a suitable lifting device to muffler (3) .
Show/hide table
Illustration 2 | g01089247 |
- Loosen clamp (6). Remove muffler (3). The weight of muffler (3) is approximately 45 kg (100 lb).
Show/hide table
Illustration 3 | g01089249 |
- Remove bracket assemblies (7) .
Show/hide table
Illustration 4 | g01089252 |
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 1     |
- Install bracket assemblies (7) .
Show/hide table
Illustration 5 | g01089252 |
- Attach Tooling (A) and a suitable lifting device to muffler (3) .
Show/hide table
Illustration 6 | g01089247 |
- Install muffler (3). The weight of muffler (3) is approximately 45 kg (100 lb). Tighten clamp (6) .
Show/hide table
Illustration 7 | g01089249 |
- Install bracket (5). Install bolts (2) .
Show/hide table
Illustration 8 | g01089240 |
- Connect tube assembly (4) to muffler (3). Install angle (1) .
End By: Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Electric Starting System - Test
525C, 535C and 545C Wheel Skidders Engine Oil Level - Check
2005/01/10 New Triten Bucket Wear Plates Are Available {6120}
Repairing Track Roller Frames{4151} Repairing Track Roller Frames{4151}
525C, 535C and 545C Wheel Skidders Fuel Tank Cap and Strainer - Clean
D9T Track-Type Tractor Machine Systems Implement Control Valve - Disassemble
525C, 535C and 545C Wheel Skidders Fuel System Primary Filter (Water Separator) Element - Replace
525C, 535C and 545C Wheel Skidders Fuel System Primary Filter (Water Separator) - Drain
525C, 535C and 545C Wheel Skidders Fuel System - Prime
631G and 637G Wheel Tractor-Scrapers Engine Supplement Fan - Remove and Install
C27 and C32 Engines Piston Ring Groove - Inspect
988H Wheel Loader Braking System Brake System Troubleshooting
623E Wheel Tractor-Scraper Hydraulic System Hydraulic Tank and Filter
525C, 535C and 545C Wheel Skidders Ether Starting Aid Cylinder - Replace - If Equipped
525C, 535C and 545C Wheel Skidders Battery Hold-Down - Tighten
525C, 535C and 545C Wheel Skidders Battery - Clean
623E Wheel Tractor-Scraper Hydraulic System Oil Filter (Hydraulic)
623E Wheel Tractor-Scraper Hydraulic System Vane Pump (Elevator, Implement)
Installation of the AccuGrade® GPS Electronic Components For Version 6.1{7220} Installation of the AccuGrade® GPS Electronic Components For Version 6.1{7220}
930G Wheel Loader Hydraulic System Pump Performance (Implement) - Test
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Power Train Power Train Hydraulic System
637G Wheel Tractor-Scraper Wheel Tractor Power Train Power Train Guard (Transmission) - Remove and Install
930G Wheel Loader Hydraulic System Pilot System Pressure - Test
631G and 637G Wheel Tractor-Scrapers Engine Supplement Turbocharger - Remove and Install