Battery - Clean
Show/hide table
| |
| Illustration 1 | g01089244 |
Before you can clean the battery terminals, you must open the radiator grill. The radiator grill is hinged in two places in the front of the machine. Use the following procedure to open the radiator grill.
Remove bolts (1) and (2) from the left side of the radiator grill. This will allow you to open the grill.
Show/hide table
| |
| Illustration 2 | g01089245 |
Clean the battery terminals and the surfaces of the batteries with a clean cloth. Coat the battery terminals with petroleum jelly. Make sure that the battery cables are installed securely.
Caterpillar Information System:
525C, 535C and 545C Wheel Skidders Battery Hold-Down - Tighten
525C, 535C and 545C Wheel Skidders Ether Starting Aid Cylinder - Replace - If Equipped
623E Wheel Tractor-Scraper Hydraulic System Hydraulic Tank and Filter
631G and 637G Wheel Tractor-Scrapers Engine Supplement Muffler - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Electric Starting System - Test
525C, 535C and 545C Wheel Skidders Engine Oil Level - Check
2005/01/10 New Triten Bucket Wear Plates Are Available {6120}
Repairing Track Roller Frames{4151} Repairing Track Roller Frames{4151}
525C, 535C and 545C Wheel Skidders Fuel Tank Cap and Strainer - Clean
D9T Track-Type Tractor Machine Systems Implement Control Valve - Disassemble
525C, 535C and 545C Wheel Skidders Fuel System Primary Filter (Water Separator) Element - Replace
525C, 535C and 545C Wheel Skidders Fuel System Primary Filter (Water Separator) - Drain
623E Wheel Tractor-Scraper Hydraulic System Oil Filter (Hydraulic)
623E Wheel Tractor-Scraper Hydraulic System Vane Pump (Elevator, Implement)
Installation of the AccuGrade® GPS Electronic Components For Version 6.1{7220} Installation of the AccuGrade® GPS Electronic Components For Version 6.1{7220}
930G Wheel Loader Hydraulic System Pump Performance (Implement) - Test
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Power Train Power Train Hydraulic System
637G Wheel Tractor-Scraper Wheel Tractor Power Train Power Train Guard (Transmission) - Remove and Install
930G Wheel Loader Hydraulic System Pilot System Pressure - Test
631G and 637G Wheel Tractor-Scrapers Engine Supplement Turbocharger - Remove and Install
AD55 Underground Articulated Truck Power Train Transmission Hydraulic Control Pilot Pressure - Test and Adjust
AD55 Underground Articulated Truck Power Train Selector and Pressure Control Valve - Adjust
D8T Track-Type Tractor Power Train Relief Valve (Transmission) - Test and Adjust
D10R Track-Type Tractor Power Train Torque Converter - Assemble