Temperature Sensor (Implement, Hydraulic Fan Oil) (Steering, Brake Oil)
Show/hide table
 | |
| Illustration 1 | g00944482 |
(1) Installation torque for the temperature sensor ... 20 ± 3 N·m (15 ± 2 lb ft)
The output of the temperature sensor is pulse width modulated at 5000 hertz.
Normal operating temperature ... -40 to 120 °C (-40 to 248 °F)
Voltage range ... 7.5 to 8.5 VDC
Maximum output current ... 7.4 mA
Caterpillar Information System:
545 Wheel Skidder Engine Starting with Auxiliary Start Receptacle - If Equipped
854G Wheel Dozer Hydraulic System Liquid Level Switch (Hydraulic Tank) (Steering and Brake Tank)
545 Wheel Skidder Lifting and Tying Down the Machine
854G Wheel Dozer Hydraulic System Hydraulic Tank (Implement, Hydraulic Fan)
545 Wheel Skidder Roading the Machine
D3G, D4G and D5G Track-Type Tractors AccuGrade Laser CB 11 Low Voltage
AccuGrade Laser System CB 10 Set Limits Fault
AccuGrade Laser System CB 9 Calibration Failure
AccuGrade Laser System CB 7 Calibration Failure
AccuGrade Laser System CB 5 Calibration Failure
3114, 3116, 3126 Engines Rear Seal Carrier
AccuGrade Laser System CB 4 Calibration Failure
2004/12/06 New Master Links With Improved Reliability and Improved Durability Are Now Used {4169, 4171}
3408E and 3412E Engines for Caterpillar Built Machines Atmospheric Pressure Sensor
854G Wheel Dozer Hydraulic System Gear Pump (Implement Pilot)
D9T Track-Type Tractor Machine Systems Steering Pump - Disassemble
D9T Track-Type Tractor Machine Systems Steering Pump - Assemble
D10R Track-Type Tractor Equipment Lowering with Engine Stopped
AccuGrade Laser System CB 12 System Hours Lost
AccuGrade Laser System CB 13 Valve Calibration Lost
631G and 637G Wheel Tractor-Scrapers Hydraulic System Trailing Unit Control
AccuGrade Laser System CB 14 Memory Error
2004/04/05 A New Retaining Ring Is Used in the Clutches of the Transmission {3030, 3155}
AccuGrade Laser System CB 15 Memory Error