854G Wheel Dozer Hydraulic System Caterpillar


Liquid Level Switch (Hydraulic Tank) (Steering and Brake Tank)

Usage:

854G A4W



Illustration 1g00102038


NOTICE

If low impedance test equipment is used to test this switch, damage to the switch could result. Do not use a circuit tester light to test this switch. Do not use an analog multimeter to test this switch. Test only with a digital multimeter.


(1) Torque for switch ... 33 ± 4 N·m (24 ± 3 lb ft)

(A) Switch contacts are closed.

(B) The switch contacts should be open when the hydraulic oil level falls below 10 ± 5 mm (0.4 ± 0.2 inch) from the centerline of the switch.

(C) The switch contacts should be closed when the hydraulic oil level rises to a minimum of 2.3 mm (0.09 inch) from the centerline of the switch.

(D) Maximum travel distance equals 34.6 mm (1.36 inch).

(E) Switch contacts are open.

Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.