IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Caterpillar


Engine Air Filter Service Indicator - Inspect/Replace

Usage:

950G 2JS



图 1g00989798

要检查维修指示器的状况,尝试复位维修指示器。 此操作需要推动复位按钮不到三次。

接着,检查维修指示器里黄活塞的移动状况。 起动发动机,并使其在高怠速下转动数秒钟。 放开调速器控制踏板之后,在加速过程中把黄活塞顶到最高的位置应该得以保持。

如果这些条件中任一项未满足,更换维修指示器。

Caterpillar Information System:

IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Differential and Final Drive Oil Sample - Obtain
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System Tilt Cylinder - High Lift
C7 Engines for Caterpillar Built Machines Camshaft Idler Gear - Remove and Install
C15 and C18 Generator Set Engines Pistons and Connecting Rods - Install
C15 and C18 Generator Set Engines Connecting Rod Bearings - Remove
C15 On-Highway Engine Crankshaft - Install
C15 and C18 Generator Set Engines Pistons and Connecting Rods - Disassemble
C15 On-Highway Engine Pistons and Connecting Rods - Assemble
C15 On-Highway Engine Camshaft - Remove
C15 On-Highway Engine Camshaft - Install
C15 and C18 Generator Set Engines Connecting Rod Bearings - Install
C15 and C18 Generator Set Engines Crankshaft Main Bearings - Remove
3500B Series II Marine Engines MID 036 - CID 0253 - FMI 02 Personality Module mismatch
3500B Series II Marine Engines MID 036 - CID 0254 - FMI 12 Electronic Control Module Error
Installation Instructions for the 2Q-8564 Ride Control Gp (KIT){5004, 5004} Installation Instructions for the 2Q-8564 Ride Control Gp (KIT){5004, 5004}
C7 Engines for Caterpillar Built Machines Camshaft Bearings - Remove and Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System Relief Valve
Installation of Product Link{7602} Installation of Product Link{7602}
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Engine Oil Sample - Obtain
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System Electrohydraulic Control
2003/11/17 Changes to the Mounting Hardware Improve the Service Life of the Rear Frame {7051}
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System Pilot Operated Hydraulic Control
AD30 Underground Articulated Truck Transmission Oil - Change
AD30 Underground Articulated Truck Engine Mounts - Inspect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.