Pistons and Connecting Rods - Disassemble
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件描述 | 数量 |
A | 6V-6192 | 钳子 | 1 |
B | 7M-3978(1)
7B-7974(2) |
活塞环扩张器总成 | 1 |
Show/hide table
(1) | C15 |
(2) | C18 |
开始:
- 拆下活塞和连杆。 请参阅拆解和组装, "活塞和连杆 - 拆卸"。
注: 为每个活塞和连接杆组件的部件做标记。 所有部件必须安装回原来的位置。 请勿交换使用部件。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将连杆轴承 (9) 从连杆轴承盖 (10) 上拆下。 将连杆轴承 (9) 从连杆 (6) 上拆下。
- 使用工具 (A) 将销挡圈 (5) 从活塞体组件 (4) 上拆下。
- 将连杆 (8) 和连杆 (6) 从活塞体组件 (4) 上拆下。
- 使用工具 (B) 将活塞环 (1)、 (2) 和 (3) 从活塞体组件 (4) 上拆下。
- 此时请勿将轴承 (7) 从连杆 (6) 上拆下。
Show/hide table
图 1 | g01017728 |
Caterpillar Information System:
C15 On-Highway Engine Pistons and Connecting Rods - Assemble
C15 On-Highway Engine Camshaft - Remove
C15 On-Highway Engine Camshaft - Install
C15 and C18 Generator Set Engines Connecting Rod Bearings - Install
C15 and C18 Generator Set Engines Crankshaft Main Bearings - Remove
C15 On-Highway Engine Crankshaft - Remove
C15 and C18 Generator Set Engines Crankshaft Main Bearings - Install
963C Track-Type Loader Track - Check/Adjust
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Cooling System Coolant Sample (Level 2) - Obtain
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Cooling System Coolant Sample (Level 1) - Obtain
2003/03/31 Correction to Disassembly and Assembly , "Bucket" {6101}
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Daily Inspection
C15 On-Highway Engine Crankshaft - Install
C15 and C18 Generator Set Engines Connecting Rod Bearings - Remove
C15 and C18 Generator Set Engines Pistons and Connecting Rods - Install
C7 Engines for Caterpillar Built Machines Camshaft Idler Gear - Remove and Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System Tilt Cylinder - High Lift
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Differential and Final Drive Oil Sample - Obtain
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Engine Air Filter Service Indicator - Inspect/Replace
3500B Series II Marine Engines MID 036 - CID 0253 - FMI 02 Personality Module mismatch
3500B Series II Marine Engines MID 036 - CID 0254 - FMI 12 Electronic Control Module Error
Installation Instructions for the 2Q-8564 Ride Control Gp (KIT){5004, 5004} Installation Instructions for the 2Q-8564 Ride Control Gp (KIT){5004, 5004}
C7 Engines for Caterpillar Built Machines Camshaft Bearings - Remove and Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System Relief Valve