Atmospheric Pressure Sensor - Remove and Install
Removal Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect the harness assembly from atmospheric pressure sensor (1) .
Show/hide table
 | |
| Illustration 1 | g01183890 |
- Remove atmospheric pressure sensor (1) .
- Inspect the condition of the O-ring seal on atmospheric pressure sensor (1). Replace the O-ring seal, if necessary.
Installation Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install atmospheric pressure sensor (1). Tighten atmospheric pressure sensor (1) to a torque of 10 ± 2 N·m (89 ± 18 lb in).
Show/hide table
| | |
| Illustration 2 | g01183890 |
- Connect the harness assembly to atmospheric pressure sensor (1) .
Caterpillar Information System:
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
C7.1 (Mech) Industrial Engine Engine Oil Cooler
Marine Multi-Station Control System Junction Box
Marine Multi-Station Control System E881 Multiple Stations on Master Control Data Link
Marine Multi-Station Control System Control Head - Calibrate
Marine Multi-Station Control System General Information
Marine Multi-Station Control System Marine Power Display
3126B Petroleum Engine Belt Tightener - Install
Marine Multi-Station Control System General Information
Marine Multi-Station Control System Service Tools
Marine Multi-Station Control System Connector Locations
Marine Multi-Station Control System Electronic Service Tool Will Not Communicate with PCP
345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Motor - Disassemble
345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Motor - Assemble
568 Forest Machines Machine Systems Swing Cushion Valve - Disassemble
568 Forest Machines Machine Systems Swing Cushion Valve - Assemble
3126B Petroleum Engine Coolant Temperature Sensor - Remove and Install
3126B Petroleum Engine Engine Oil Pressure Sensor - Remove and Install
C2.2 Generator Sets Generator Lead Connections
3126B Petroleum Engine Fuel Pressure Sensor - Remove and Install
C15 On-Highway Engine Fuel System
3126B Petroleum Engine Injection Actuation Pressure Sensor - Remove and Install
3126B Petroleum Engine Engine Oil Temperature Sensor - Remove and Install
3126B Petroleum Engine Speed/Timing Sensor - Remove and Install