E881 Multiple Stations on Master Control Data Link
Conditions Which Generate This Code:
Multiple control stations exist on the data link for the master control station.
Test Step 1. CHECK FOR MULTIPLE CONTROL STATIONS ON THE DATA LINK FOR THE MASTER CONTROL STATION.
- Verify that the data link for the control station has not been connected into the data link for the master control station.
Expected Result:
The data link for the control station has not been connected into the data link for the master control station.
Results:
- OK - The data link for the control station has not been connected into the data link for the master control station.
STOP
- NOT OK - The data link for the control station HAS BEEN connected into the data link for the master control station.
Repair: Remove the data link for the control station from the data link for the master control station.
STOP
Caterpillar Information System:
Marine Multi-Station Control System Control Head - Calibrate
Marine Multi-Station Control System General Information
Marine Multi-Station Control System Marine Power Display
3126B Petroleum Engine Belt Tightener - Install
Marine Multi-Station Control System General Information
Marine Multi-Station Control System Service Tools
Marine Multi-Station Control System Connector Locations
Marine Multi-Station Control System Electronic Service Tool Will Not Communicate with PCP
Marine Multi-Station Control System Diagnostic Code List
Marine Multi-Station Control System Engine Cranks but Will Not Start
Marine Multi-Station Control System Using Caterpillar Electronic Technician (ET) to Determine Diagnostic Codes
Marine Multi-Station Control System ECM CID 0091 - FMI 08
Marine Multi-Station Control System Junction Box
C7.1 (Mech) Industrial Engine Engine Oil Cooler
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
3126B Petroleum Engine Atmospheric Pressure Sensor - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Motor - Disassemble
345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Motor - Assemble
568 Forest Machines Machine Systems Swing Cushion Valve - Disassemble
568 Forest Machines Machine Systems Swing Cushion Valve - Assemble
3126B Petroleum Engine Coolant Temperature Sensor - Remove and Install
3126B Petroleum Engine Engine Oil Pressure Sensor - Remove and Install
C2.2 Generator Sets Generator Lead Connections
3126B Petroleum Engine Fuel Pressure Sensor - Remove and Install