Sequence and Pressure Control Valve (Apron)
Show/hide table
Illustration 1 | g00296335 |
(1) 9J-1330 Shim
- Thickness ... 0.787 mm (0.0310 inch)
- One shim will change the opening pressure. ... 792 kPa (115 psi)
Assemble shim (1) next to spring (4) .
(2) 8J-4452 Shim
- Thickness ... 0.12 mm (0.005 inch)
- One shim will change the opening pressure. ... 306 kPa (44 psi)
(3) Relief Valve
- Relief setting for sequence pressure ... 6550 ± 1035 kPa (950 ± 150 psi)
- Relief function for apron lower ... 16500 ± 170 kPa (2400 ± 25 psi)
Note: During the apron LOWER position, the main relief valve will relieve system pressure before the sequence and pressure control valve will relieve pressure.
(4) 4T-7292 Spring
- Length under test force ... 58.7 mm (2.31 inch)
- Test force ... 260 N (59 lb)
- Free length after test ... 65.3 mm (2.57 inch)
- Outside diameter ... 13.5 mm (0.53 inch)
- Test force ... 260 N (59 lb)
Caterpillar Information System:
H35E S, H45E S, H55E S and H65E S Hydraulic Hammers Work Tool - Inspect/Recondition
657G Wheel Tractor-Scraper Backup Alarm - Test
623G Wheel Tractor-Scraper Monitoring System
657G Wheel Tractor-Scraper Hydraulic System Pilot Control Actuator (Apron, Bowl, and Ejector)
IT28G Integrated Toolcarrier and 924G, 924GZ, 928G and 930G Wheel Loaders Engine Crankcase Breather (Closed Circuit) - Replace - If Equipped
2002/10/21 A New Dust Ejector Group for the Exhaust is Now Available {1068}
623E Wheel Tractor-Scraper Hydraulic System Vane Pump (Hydraulic and Steering)
539 Knuckleboom Loader Receiver Dryer (Refrigerant) - Replace
C-9 Engine for Caterpillar Built Machines Injection Actuation Pressure - Test
637G Wheel Tractor-Scraper Fuel System Water Separator - Drain
637G Wheel Tractor-Scraper Fuel System Secondary Filter - Replace
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System Diagnostic Code List
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System Using Caterpillar Monitoring System to Determine Diagnostic Codes
3516B Engine for Caterpillar Built Machines Diagnostic Codes
621G and 627G Wheel Tractor-Scrapers Hydraulic System Check Valve (Carry and Quick-Drop)
621G and 627G Wheel Tractor-Scrapers Hydraulic System Draft Frame
621G and 627G Wheel Tractor-Scrapers Hydraulic System Ejector
637G Wheel Tractor-Scraper Steering Pump Outlet Screen - Clean
621G Wheel Tractor-Scraper Engine Oil Level - Check
D5N Track-Type Tractor Capacities (Refill)
637G Wheel Tractor-Scraper Transmission Breathers - Clean
637G Wheel Tractor-Scraper Transmission Oil Filter and Magnetic Screen - Replace/Clean
637G Wheel Tractor-Scraper Transmission Oil Sample - Obtain
637G Wheel Tractor-Scraper Cooling System Coolant Sample (Level 1) - Obtain