Transmission Breathers - Clean
Show/hide table
Illustration 1 | g00927797 |
The transmission breather for the tractor is located on the top of the transmission and at the right rear of the tractor.
Show/hide table
Illustration 2 | g00923132 |
The transmission breather for the scraper is located on the top of the transmission oil reservoir at the left rear of the scraper.
Use the following procedure to clean each breather.
- Clean the area around the breather.
- Remove the breather.
- Wash the breather in clean, nonflammable solvent.
- Allow the breather to dry.
- Install the breather.
Caterpillar Information System:
D5N Track-Type Tractor Capacities (Refill)
621G Wheel Tractor-Scraper Engine Oil Level - Check
637G Wheel Tractor-Scraper Steering Pump Outlet Screen - Clean
621G and 627G Wheel Tractor-Scrapers Hydraulic System Ejector
621G and 627G Wheel Tractor-Scrapers Hydraulic System Draft Frame
621G and 627G Wheel Tractor-Scrapers Hydraulic System Check Valve (Carry and Quick-Drop)
3516B Engine for Caterpillar Built Machines Diagnostic Codes
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System Using Caterpillar Monitoring System to Determine Diagnostic Codes
631G and 637G Wheel Tractor-Scrapers Hydraulic System Sequence and Pressure Control Valve (Apron)
H35E S, H45E S, H55E S and H65E S Hydraulic Hammers Work Tool - Inspect/Recondition
657G Wheel Tractor-Scraper Backup Alarm - Test
623G Wheel Tractor-Scraper Monitoring System
637G Wheel Tractor-Scraper Transmission Oil Filter and Magnetic Screen - Replace/Clean
637G Wheel Tractor-Scraper Transmission Oil Sample - Obtain
637G Wheel Tractor-Scraper Cooling System Coolant Sample (Level 1) - Obtain
637G Wheel Tractor-Scraper Engine Air Filter Service Indicator - Inspect
3516B Generator Set Engines with Dynamic Gas Blending Grounding Practices
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Hydraulic Fan System
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Vane Pump (Braking)
621G and 627G Wheel Tractor-Scrapers Hydraulic System Pump Control Valve (Cushion-Hitch) - Test and Adjust
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System Power Supply Circuit of Electronic Control Module
621G and 627G Wheel Tractor-Scrapers Hydraulic System Apron
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System Backup Alarm Always On