Steering Pump Outlet Screen - Clean
Note: Clean the steering pump outlet screen when there is pump failure or when the pump is changed in the hydraulic system.
The steering pump outlet screen is located inside the right frame rail of the tractor.
- Remove bolts (1) and cover (2).
- Inspect seal (3). Replace seal (3) if the seal is damaged.
- Remove screen (4). Clean screen (4) and cover (2) in a nonflammable solvent.
- Install screen (4), seal (3), cover (2) and bolts (1).
Show/hide table
Illustration 1 | g00927778 |
Show/hide table
Illustration 2 | g00927776 |
Caterpillar Information System:
621G and 627G Wheel Tractor-Scrapers Hydraulic System Ejector
621G and 627G Wheel Tractor-Scrapers Hydraulic System Draft Frame
621G and 627G Wheel Tractor-Scrapers Hydraulic System Check Valve (Carry and Quick-Drop)
3516B Engine for Caterpillar Built Machines Diagnostic Codes
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System Using Caterpillar Monitoring System to Determine Diagnostic Codes
631G and 637G Wheel Tractor-Scrapers Hydraulic System Sequence and Pressure Control Valve (Apron)
H35E S, H45E S, H55E S and H65E S Hydraulic Hammers Work Tool - Inspect/Recondition
657G Wheel Tractor-Scraper Backup Alarm - Test
623G Wheel Tractor-Scraper Monitoring System
657G Wheel Tractor-Scraper Hydraulic System Pilot Control Actuator (Apron, Bowl, and Ejector)
IT28G Integrated Toolcarrier and 924G, 924GZ, 928G and 930G Wheel Loaders Engine Crankcase Breather (Closed Circuit) - Replace - If Equipped
2002/10/21 A New Dust Ejector Group for the Exhaust is Now Available {1068}
621G Wheel Tractor-Scraper Engine Oil Level - Check
D5N Track-Type Tractor Capacities (Refill)
637G Wheel Tractor-Scraper Transmission Breathers - Clean
637G Wheel Tractor-Scraper Transmission Oil Filter and Magnetic Screen - Replace/Clean
637G Wheel Tractor-Scraper Transmission Oil Sample - Obtain
637G Wheel Tractor-Scraper Cooling System Coolant Sample (Level 1) - Obtain
637G Wheel Tractor-Scraper Engine Air Filter Service Indicator - Inspect
3516B Generator Set Engines with Dynamic Gas Blending Grounding Practices
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Hydraulic Fan System
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Vane Pump (Braking)
621G and 627G Wheel Tractor-Scrapers Hydraulic System Pump Control Valve (Cushion-Hitch) - Test and Adjust