2005/06/01 Caterpillar


An Improved Oil Drain Tube for the Turbocharger is Now Used {1052, 1307}

Usage:

C11 KCA
Engine:
C11 (S/N: KCA1-UP)
C13 (S/N: KCB1-UP)

Description of Change: An improved drain tube assembly is now used for the oil return tube on the engine turbocharger for the above listed engines. This improved drain tube assembly will provide additional clearance around the tube in order to improve routing of the tube. This will also minimize interferences to the oil drain tube assembly. This improvement will improve the durability and serviceability of this drain tube assembly.

Adaptable To:




Illustration 1g01175401

(1) Drain tube assembly

An improved 230-3828 Drain Tube As (1) is now used for the oil drain tube on the engine turbocharger that returns the lubrication oil to the engine. This improved drain tube assembly is effective with (S/N: KCA06287-UP; KCB40882-UP).

Also, an improved 230-3824 Drain Tube As (1) is now used for the oil drain tube on the engine turbocharger that returns the lubrication oil to the engine. This improved drain tube assembly is effective with (S/N: KCA05600-UP; KCB33350-UP). The new bracket is also available for both Drain Tube As as service replacement to first production.

Caterpillar Information System:

C-12 Generator Set Engine E368 High Intake Manifold Air Temperature
C18 Marine Generator Set Engines E199 Low Coolant Temperature
C18 Marine Generator Set Engines Event Codes
C18 Marine Generator Set Engines CAN Data Link Circuit - Test
C18 Marine Generator Set Engines Switch Circuits - Test
Hydraulic Cylinder Repair Process {7562} Hydraulic Cylinder Repair Process {7562}
3500 Generator Set Engines Exhaust Manifold
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Information Plate
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Ethernet Interface
C9 Engine for Caterpillar Built Machines Flywheel Adapter - Remove and Install
C18 Marine Generator Set Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Quick Coupler - Clean
3500 Generator Set Engines Cylinder Block
EMCPII+ for Gas Engines Shutdown Mode
C18 Marine Generator Set Engines System Configuration Parameters
C7 PETROLEUM Petroleum Engine Atmospheric Pressure Sensor - Remove and Install
C15 and C18 Petroleum Generator Sets Electrical System
TH48-E80 Petroleum Transmission Torque Converter
2005/08/29 New Exhaust Bellows Provide Improved Sealing of Exhaust Gas {1059}
C9 Engine for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
3500 Industrial and Generator Set Engines Air Shutoff - Test
C9 Engine for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
C32 Power Module Engine Air Cleaner Element (Dual Element) - Clean/Replace - If Equipped
C7 PETROLEUM Petroleum Engine Fuel Pressure Sensor - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.