Exhaust Manifold
Show/hide table
Illustration 1 | g01175045 |
(1) Elbow
Use the following procedure during engine assembly or turbocharger service.
- Assemble the elbow assembly to the manifold and to the turbocharger.
- Install the bolts. Tighten the bolts by hand.
- Align the elbow assembly in order to minimize angular distortion in the bellows.
- Tighten the bolts.
(2) Bolt
- Torque ...
135 ± 20 N·m (100 ± 15 lb ft)
Apply 5P-3931 Anti-Seize Compound to the threads of the bolts.
(3) Bolt
- Torque ...
55 ± 10 N·m (40 ± 7 lb ft)
Apply 5P-3931 Anti-Seize Compound to the threads of the bolts.
(4) Bolt
- Torque ...
65 ± 5 N·m (48 ± 4 lb ft)
Apply 5P-3931 Anti-Seize Compound to the threads of the bolts.
Caterpillar Information System:
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Information Plate
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Ethernet Interface
C9 Engine for Caterpillar Built Machines Flywheel Adapter - Remove and Install
C18 Marine Generator Set Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Quick Coupler - Clean
C15 and C18 Petroleum Generator Sets Cold Weather Starting
C-10, C-12, C-15 and C-16 Industrial Engines Cat Data Link Circuit - Test
3500 Generator Set Engines Exhaust Manifold
3500 Generator Set Engines Turbocharger
C11 and C13 On-Highway Engines Exhaust Manifold
C9 Engine for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C9 Engine for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
Hydraulic Cylinder Repair Process {7562} Hydraulic Cylinder Repair Process {7562}
C18 Marine Generator Set Engines Switch Circuits - Test
C18 Marine Generator Set Engines CAN Data Link Circuit - Test
C18 Marine Generator Set Engines Event Codes
C18 Marine Generator Set Engines E199 Low Coolant Temperature
C-12 Generator Set Engine E368 High Intake Manifold Air Temperature
2005/06/01 An Improved Oil Drain Tube for the Turbocharger is Now Used {1052, 1307}
3500 Generator Set Engines Cylinder Block
EMCPII+ for Gas Engines Shutdown Mode
C18 Marine Generator Set Engines System Configuration Parameters
C7 PETROLEUM Petroleum Engine Atmospheric Pressure Sensor - Remove and Install
C15 and C18 Petroleum Generator Sets Electrical System