3500B and 3500C Generator Set Engines Caterpillar


Electrical Connectors and Functions

Usage:

3508 BGX


图 1g01156532
电子控制模块(ECM)


图 2g00680846
2 针接头


图 3g00680848
3 针接头

Caterpillar Information System:

C7 On-highway Engine Turbocharger - Inspect
C27 and C32 Industrial and Petroleum Engines Coolant Level Sensor Circuit - Test
C9.3 Tier 4 Final Engines Finding Top Center Position for No. 1 Piston
2005/05/01 New Full Load Settings and New Full Torque Settings are Now Available {7620}
C280 Marine Auxiliary Engines Too Much Vibration
C4.4 Marine Generator Set Engines Aftercooler - Remove and Install
2005/05/16 New 3500 Marine Propulsion Software Available {7620}
C9.3 Tier 4 Final Engines Water Pump - Test
Yellowmark Noise and Roading Homologation Statement {1062} Yellowmark Noise and Roading Homologation Statement {1062}
C9 Engine for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C7 On-highway Engine Cooling System
3500B and 3500C Generator Set Engines MID 036 - CID 0175 - FMI 03 Engine Oil Temperature open/short to +batt
2005/05/16 A New Aftercooler Core is Used {1063, 1064}
C9.3 Engines for Caterpillar Built Machines Vibration Damper - Check
C27 and C32 Industrial and Petroleum Engines Electrical Power Supply Circuit - Test
2005/05/23 A New Gasket is Used {1063, 1380}
C280 Marine Engines Fuel Injector Adjustment
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056} Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
3500B and 3500C Generator Set Engines MID 036 - CID 0253 - FMI 02 Personality Module mismatch
C9 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
C4.4 Marine Auxiliary Generator Set Engine Tube Group
2005/08/01 Improved Fumes Disposal Filter Group Is Now Used on Gas Power Modules {1074}
C27 and C32 Industrial and Petroleum Engines Indicator Lamp Circuit - Test
C280 Marine Engines Restriction of Air Inlet and Exhaust
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.