2005/05/01 Caterpillar


New Full Load Settings and New Full Torque Settings are Now Available {7620}

Usage:

C-12 MBL
On-highway Engines:
C-12 (S/N: MBL1-11915)
C-15 (S/N: MBN1-29963)

New Full Load Settings (FLS) and new Full Torque Settings (FTS) are now available for the on-highway engines that are listed above. In order to obtain the new settings, refer to the following address on the internet:

  • http://truck.cat.com/cda/layout?m=262&x=7

Caterpillar Information System:

C280 Marine Auxiliary Engines Too Much Vibration
C4.4 Marine Generator Set Engines Aftercooler - Remove and Install
2005/05/16 New 3500 Marine Propulsion Software Available {7620}
C9.3 Tier 4 Final Engines Water Pump - Test
Yellowmark Noise and Roading Homologation Statement {1062} Yellowmark Noise and Roading Homologation Statement {1062}
C9 Engine for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C7 On-highway Engine Cooling System
3500B and 3500C Generator Set Engines MID 036 - CID 0175 - FMI 03 Engine Oil Temperature open/short to +batt
3500B and 3500C Generator Set Engines MID 036 - CID 0799 - FMI 12 Need Service tool update
3500B and 3500C Generator Set Engines MID 036 - CID 0175 - FMI 04 Engine Oil Temperature short to ground
C4.4 Marine Generator Set Engines Electric Starting Motor - Remove and Install
C4.4 Marine Generator Set Engines Electric Starting Motor - Remove and Install
C9.3 Tier 4 Final Engines Finding Top Center Position for No. 1 Piston
C27 and C32 Industrial and Petroleum Engines Coolant Level Sensor Circuit - Test
C7 On-highway Engine Turbocharger - Inspect
3500B and 3500C Generator Set Engines Electrical Connectors and Functions
2005/05/16 A New Aftercooler Core is Used {1063, 1064}
C9.3 Engines for Caterpillar Built Machines Vibration Damper - Check
C27 and C32 Industrial and Petroleum Engines Electrical Power Supply Circuit - Test
2005/05/23 A New Gasket is Used {1063, 1380}
C280 Marine Engines Fuel Injector Adjustment
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056} Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
3500B and 3500C Generator Set Engines MID 036 - CID 0253 - FMI 02 Personality Module mismatch
C9 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.