Inlet and Exhaust Valve Springs - Remove and Install
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 176-5487 | 气门弹簧压缩器 | 1 |
开始:
- 拆下单体喷油器。 请参阅拆解和组装, "单体喷油器 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
注: 下列步骤用于拆卸进气门弹劾和出气门弹簧,不用拆卸缸盖。 一次只能在一个气缸上执行该步骤。 这会防止进气门和排气门落入气缸。
- 旋转曲轴使活塞位于缸内上止点。
Show/hide table
图 1 g01167733 Show/hide table被弹簧力爆出的零件击中,会招致人员伤害。
确保穿上所有必要的保护装备。
遵照建议的程序,并使用所有建议的工具以释放弹簧力。
- 利用工具 (A) 压缩进气门弹簧和排气门弹簧。
- 拆下挡圈锁片 (2)。
- 拆下工具 (A)。
- 拆下弹簧挡圈 (3)。
- 将进气门弹簧 (4) 和排气门弹簧 (5) 从每个气门 (1) 上拆下。 从缸盖上拆下气门弹簧座。
- 转动曲轴前安装进气门弹簧和排气门弹簧。
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 176-5487 | 气门弹簧压缩器 | 1 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 安装进气门弹簧和排气门弹簧的气门弹簧座。
Show/hide table
图 2 g01167733 Show/hide table弹簧压缩零件如果安装不当,会伤害人体。
为避免伤害,遵照出版的装配程序,并穿上保护装备。
- 将进气门弹簧 (4) 和排气门弹簧 (5) 安装到每个气门 (1) 上。
- 安装弹簧挡圈 (3)。
- 利用工具 (A) 压缩进气门弹簧和排气门弹簧。
- 安装挡圈锁片 (2)。
结束:
- 安装单体喷油器。 请参阅拆解和组装, "单体喷油器 - 安装"。
Caterpillar Information System:
3500B and 3500C Generator Set Engines MID 036 - CID 0253 - FMI 02 Personality Module mismatch
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056} Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
C280 Marine Engines Fuel Injector Adjustment
2005/05/23 A New Gasket is Used {1063, 1380}
C27 and C32 Industrial and Petroleum Engines Electrical Power Supply Circuit - Test
C9.3 Engines for Caterpillar Built Machines Vibration Damper - Check
2005/05/16 A New Aftercooler Core is Used {1063, 1064}
3500B and 3500C Generator Set Engines Electrical Connectors and Functions
C7 On-highway Engine Turbocharger - Inspect
C27 and C32 Industrial and Petroleum Engines Coolant Level Sensor Circuit - Test
C9.3 Tier 4 Final Engines Finding Top Center Position for No. 1 Piston
2005/05/01 New Full Load Settings and New Full Torque Settings are Now Available {7620}
C4.4 Marine Auxiliary Generator Set Engine Tube Group
2005/08/01 Improved Fumes Disposal Filter Group Is Now Used on Gas Power Modules {1074}
C27 and C32 Industrial and Petroleum Engines Indicator Lamp Circuit - Test
C280 Marine Engines Restriction of Air Inlet and Exhaust
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Symbols
2011/03/09 An Improved Lifter Is Used for 3500 Engines with Mechanical Unit Injectors {1102, 1121, 1123}
C13 and C15 On-highway Engines Injector Solenoid - Test
G3400 Engines (EIS) MID 014 - CID 0329 - FMI 11 Communication Fault with CAT A/F Ratio Control
C27 and C32 Industrial and Petroleum Engines Event Codes
C9.3 Engines for Caterpillar Built Machines Engine Oil Pressure - Test
C27 and C32 Industrial and Petroleum Engines Diagnostic Code Cross Reference
C7 On-highway Engine Electronic Control System Components