Fuel Shutoff Solenoid - Test
Show/hide table
Illustration 1 | g00860355 |
(1) Fuel shutoff solenoid (2) Plunger |
This procedure tests the fuel shutoff solenoid for correct operation.
- Remove the fuel shutoff solenoid from the engine. Refer to Disassembly and Assembly, "Fuel Shutoff Solenoid - Remove and Install".
- Connect the fuel shutoff solenoid to the test circuit that is shown in Illustration 2.
- When the start button is pushed, plunger (2) should retract. The plunger should remain retracted until the circuit is de-energized by the stop switch. If the fuel shutoff solenoid fails this test, replace the fuel shutoff solenoid.
Show/hide table
Illustration 2 | g00713506 |
- Install the fuel shutoff solenoid on the engine. Refer to Disassembly and Assembly, "Fuel Shutoff Solenoid - Remove and Install".
Caterpillar Information System:
988G Wheel Loader Power Train MID 081 - CID 0485 - FMI 05
D6R Track-Type Tractor Power Train Transmission
988G Wheel Loader Machine Systems Ride Control Accumulator - Assemble
545 Wheel Skidder Hydraulic and Steering System Hydraulic and Steering System Troubleshooting
988G Wheel Loader Power Train MID 081 - CID 0485 - FMI 03
2002/05/20 Improved Electric Fuel Shutoff Solenoid {1259}
525B and 535B Wheel Skidders Hydraulic and Steering System Visual Inspection
988G Wheel Loader Machine Systems Ride Control Accumulator - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines User Defined Shutdown Input Circuit - Test
988G Wheel Loader Machine Systems Bucket - Install
988G Wheel Loader Power Train MID 081 - CID 0444 - FMI 06
3408E and 3412E Engines for Caterpillar Built Machines Engine Speed/Timing Sensor - Calibrate
525B and 535B Wheel Skidders Hydraulic and Steering System System Pressure - Release
966G Wheel Loader and 972G Wheel Loader Engine Supplement System Pressure - Release
D9R Track-Type Tractor Turbocharger - Remove
143H and 163H Motor Graders Engine Air Filter Service Indicator Screen - Check/Replace
525B and 535B Wheel Skidders Hydraulic and Steering System Piston Pump (Implement, Pilot, Steering, Brake) - Test and Adjust
988G Wheel Loader Electrohydraulic System Relief Valve (Main) - Test and Adjust
988G Wheel Loader Power Train MID 081 - CID 0485 - FMI 06
980H Wheel Loader Hydraulic System Oil Filter - Replace
525B and 535B Wheel Skidders Hydraulic and Steering System Pump Flow - Test
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Implement Cycle Time - Check
Procedure to Install 194-1518 Coupler Lines on Certain Wheel Loaders{5057, 6129, 6700} Procedure to Install 194-1518 Coupler Lines on Certain Wheel Loaders{5057, 6129, 6700}
D8R Series II Track-Type Tractor Engine Supplement Engine and Torque Divider - Install