910G HYSTAT Wheel Loader Caterpillar


Lifting Capacities

Usage:

910G AKR

------ WARNING! ------

When this machine is equipped with front attachments other than a bucket, lifting a load that is greater than shown in the chart below could cause the attachment to rotate downward, allowing the load to slide or pitch forward resulting in personal injury or death.

----------------------

When you are using attachments, the weight of the attachment and the load must not be greater than the maximum allowable load at the load application point.




Illustration 1g00457248

Tilt link pin (1), Lift arm pin (2), and Load Application Point (3) .

Consult your Caterpillar dealer before you use any attachment that is not a standard equipped bucket.

Caterpillar Information System:

320C Excavator Engine Supplement Turbocharger - Install
988G Wheel Loader Power Train MID 081 - CID 0138 - FMI 04
994 Wheel Loader Braking System Temperature Sensor (Brake/Axle Oil)
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Quick Coupler
D5M Track-Type Tractor Maintenance Interval Schedule
988G Wheel Loader Power Train MID 081 - CID 0138 - FMI 03
963C Track-Type Loader Power Train Track Carrier Roller - Assemble
950F Wheel Loader and 950F Series II Wheel Loader Hydraulic System Lift Cylinder - Isolation and Drift Check
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Pump Performance (Steering) - Test
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System Diagnostic Code List
2000/05/29 A New Plate is Used to Protect the Fuel Tank Cap {1273}
988G Wheel Loader Power Train MID 081 - CID 0041 - FMI 04
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System Connector Locations
2000/06/05 Improved Upshift/Downshift Switches are Available {3030}
992G Wheel Loader and 854G Wheel Dozer Power Train MID 081 - CID 0168 - FMI 01
994D Wheel Loader Belts - Inspect/Adjust/Replace
988G Wheel Loader Power Train MID 081 - CID 0168 - FMI 00
2000/05/22 The Service Meter Display Mode Is Explained {7490}
2000/06/12 A New Slotted Transmission Clutch Piston Improves Seal Inflation {3170}
D8R Series II Track-Type Tractor Power Train Power Train Oil Pump - Disassemble
2000/07/03 A New Pinion and Seal Assembly Replaces the Former Carbon Seal {3254, 3256, 3258}
525B Wheel Skidder and 535B Wheel Skidder Hydraulic and Steering System General Information
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System Electronic Control Module (Implement) - Replace
988G Wheel Loader Power Train MID 081 - CID 0177 - FMI 03
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.