Parking Brake Control
Show/hide table
| NOTICE |
|---|
|
Do not engage the secondary brake while the machine is moving unless the primary service brake fails. The use of the secondary brake as a service brake in regular operation will cause severe damage to the brake system. |
Show/hide table
| |
| Illustration 1 | g00703506 |
Show/hide table
|
Parking Brake - The parking brake knob is located next to the engine start switch. Use the parking brake after the machine has been stopped. |
Pull the knob outward in order to engage the parking brake. Push the knob inward in order to release the parking brake.
Note: The secondary brake uses the same knob as the parking brake. Use the secondary brake only if the service brakes fail to stop the machine.
Show/hide table
| |
| Illustration 2 | g00484961 |
The indicator light on the dash panel will flash while the parking brake (secondary brake) is engaged.
Caterpillar Information System:
525B and 535B Wheel Skidders Engine Start Switch
651E and 657E Wheel Tractor-Scrapers Power Train Transmission Hydraulic Control
973C Track-Type Loader Power Train Track Drive Motor - Install
2000/05/01 Correction to Disassembly and Assembly Manual SENR1782-02 {4153}
651E and 657E Wheel Tractor-Scrapers Power Train Solenoid Valve
525B Wheel Skidder and 535B Wheel Skidder Power Train Calibration
651E and 657E Wheel Tractor-Scrapers Power Train Position Sensor (Speed)
525B Wheel Skidder and 535B Wheel Skidder Power Train Electrical Components And Connector Locations
651E and 657E Wheel Tractor-Scrapers Power Train Scraper Transmission Neutral/Run Control
SR4 HV and SR4B HV Generators Fire Prevention and Explosion Prevention
P16, P20, P25, P28, P40 and P60 Pulverizer Fire Prevention and Explosion Prevention
TK711, TK721, TK722 and TK732 Track Feller Bunchers Equipment Lowering with Engine Stopped
525B and 535B Wheel Skidders Machine Systems Bank Valve (Two) (Decking Blade, Steering) - Remove
525B Wheel Skidder and 535B Wheel Skidder Power Train Electrical Connector - Inspect
525B Wheel Skidder and 535B Wheel Skidder Power Train Electronic Control Module (Power Train) - Replace
525B Wheel Skidder and 535B Wheel Skidder Power Train Torque Converter Stall - Test
D7R Series II Track-Type Tractor Fuel Tank Cap Filter and Strainer - Replace/Clean
3176C and 3196 Engines for Caterpillar Built Machines Engine Design
988G Wheel Loader Machine Systems Bucket Links - Remove
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0497 - FMI 03
525B Wheel Skidder and 535B Wheel Skidder Power Train Solenoid Valve (Transmission Clutch) - Test
973C Track-Type Loader Power Train Hydraulic Drive Pump - Install
994D Wheel Loader Starting Motor - Inspect
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0497 - FMI 05