Camshaft
Show/hide table
图 1 | g02589956 |
(1) 排气凸轮 (2) 喷油器凸轮 (3) 进气凸轮 |
Show/hide table
260-9308 凸轮轴总成 和 293-3493 凸轮轴总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
凸轮轴标有 "F" 的一端必须处于发动机前部。 用 8T-2998 润滑剂 和清洁的发动机机油的 50/50 混合剂润滑凸轮轴轴承、轴颈和凸轮。     | |||
A     | -     | -     | 凸轮轴轴颈的直径为 84.85 ± 0.02 mm (3.341 ± 0.001 in)。     |
B     | -     | -     | 请使用以下程序得出实际的凸轮升程: 1. 测量凸轮轴凸轮高度 (C) 。 2. 测量基圆 (D) 。 3. 从步骤 3 中得到的凸轮轴凸轮高度值中减去步骤 2 中得到的基圆测量值。 二者之差即为实际凸轮升程。 规定的凸轮轴凸轮升程 排气凸轮为 8.51520 mm (0.33524 in)。 喷油器凸轮(右排)为 10.33667 mm (0.40695 in)。 喷油器凸轮(左排)为 10.33718 mm (0.40697 in)。 进气凸轮为 9.61850 mm (0.37868 in)。 步骤 3 中得出的实际凸轮升程与规定的凸轮轴凸轮升程之间的最大允许差值为 0.13 mm (0.005 in)。     |
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Cooler - Install
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Air Inlet Heater Circuit - Test
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Filter Base - Install
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
C27 and C32 Generator Set Engines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C27 and C32 Tier 4 Engines Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
C27 and C32 Generator Set Engines Turbocharger - Install
C27 and C32 Generator Set Engines Turbocharger - Assemble
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
2005/02/28 New Sleeve Bearing in the Rocker Arm {1123}
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
D Series Excavator Monitoring System Setting Mode
C27 and C32 Industrial and Petroleum Engines Exhaust Manifold
Programming ECM Governor Gain Parameters{1264, 1901} Programming ECM Governor Gain Parameters{1264, 1901}
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
2005/02/28 Finding the Latest Flash Files {7620}
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Install
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Remove
C0.5, C0.7, C1.1, C1.5, C1.6 and C2.2 Industrial Engines Belt Tension Chart
325 Variable Gauge Undercarriage MHPU Excavator Recoil Spring
C3.3 and C4.4 Generator Sets Model View Illustrations