Engine Oil Filter Base - Install
Show/hide table
PERHATIAN |
---|
Pastikan semua suku cadang bersih dari kontaminan. Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen. |
- Letakkan dudukan filter oli engine (3) pada engine. Pasang mur (5) dan baut (6).
- Pasang susunan pipa (1). Pasang baut (2) dan mur (4).
- Pasang filter oli engine.
- Isi sistem pelumasan dengan oli engine. Rujuk ke Buku Petunjuk Pengoperasian dan Perawatan, "Kapasitas Pengisian Ulang".
Show/hide table
Ilustrasi 1 | g01096521 |
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
C27 and C32 Generator Set Engines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C27 and C32 Tier 4 Engines Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
C27 and C32 Generator Set Engines Turbocharger - Install
C27 and C32 Generator Set Engines Turbocharger - Assemble
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines CID 0342 FMI 08 Secondary Engine Speed signal abnormal
2007/04/16 New Guidelines: When to Consult the Application Support Center (ASC) or the Dealer Solution Network (DSN) {1000}
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C27 and C32 Generator Set Engines CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C27 and C32 Engines for Caterpillar Built Machines CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Air Inlet Heater Circuit - Test
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Cooler - Install
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C27 and C32 Generator Set Engines Camshaft
2005/02/28 New Sleeve Bearing in the Rocker Arm {1123}
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
D Series Excavator Monitoring System Setting Mode
C27 and C32 Industrial and Petroleum Engines Exhaust Manifold
Programming ECM Governor Gain Parameters{1264, 1901} Programming ECM Governor Gain Parameters{1264, 1901}
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
2005/02/28 Finding the Latest Flash Files {7620}