Engine Oil Cooler - Install
Show/hide table
PERHATIAN |
---|
Jaga agar semua komponen telah bersih dari bahan penyebab kontaminasi. Bahan penyebab kontaminasi dapat menyebabkan keausan yang sangat cepat dan umur pemakaian komponen yang lebih singkat. |
- Geser oil cooler engine (9) ke arah belakang engine. Pasang baut (8) di setiap ujung oil cooler engine (9).
Show/hide table
Ilustrasi 2 g01145699 - Letakkan bonet (6). Pasang baut (5) dan baut (7).
- Sambungkan susunan selang (4).
- Sambungkan susunan rangkaian kabel (3).
Show/hide table
Ilustrasi 3 g01145663 - Letakkan bonet (1) dan pasang baut (2).
- Isi sistem pendinginan. Rujuk ke Buku Petunjuk Pengoperasian dan Perawatan, "Cairan Pendingin Sistem Pendinginan - Penggantian".
Show/hide table
Ilustrasi 1 | g01145708 |
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Air Inlet Heater Circuit - Test
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Filter Base - Install
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
C27 and C32 Generator Set Engines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C27 and C32 Tier 4 Engines Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
C27 and C32 Generator Set Engines Turbocharger - Install
C27 and C32 Generator Set Engines Turbocharger - Assemble
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines CID 0342 FMI 08 Secondary Engine Speed signal abnormal
2007/04/16 New Guidelines: When to Consult the Application Support Center (ASC) or the Dealer Solution Network (DSN) {1000}
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C27 and C32 Generator Set Engines Camshaft
2005/02/28 New Sleeve Bearing in the Rocker Arm {1123}
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
D Series Excavator Monitoring System Setting Mode
C27 and C32 Industrial and Petroleum Engines Exhaust Manifold
Programming ECM Governor Gain Parameters{1264, 1901} Programming ECM Governor Gain Parameters{1264, 1901}
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
2005/02/28 Finding the Latest Flash Files {7620}
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Install
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Remove
C0.5, C0.7, C1.1, C1.5, C1.6 and C2.2 Industrial Engines Belt Tension Chart