C27 and C32 Engines for Caterpillar Built Machines Caterpillar


Engine Oil Filter Base - Remove

Usage:

854K 221

Prosedur Pelepasan

Tabel 1
Alat yang Diperlukan 
Alat  Nomor Suku Cadang  Keterangan Suku Cadang  Jml 
185-3630  Susunan Kunci Strap 


PERHATIAN

Pastikan agar semua cairan selalu ditampung pada tempatnya selama melakukan pemeriksaan, perawatan, pengujian, penyetelan dan perbaikan terhadap produk. Persiapkan tempat untuk menampung cairan sebelum membuka suatu kompartemen atau membongkar suatu komponen yang berisikan cairan.

Gunakan petunjuk pada Publikasi Khusus, NENG2500, "Katalog Peralatan Servis Dealer" untuk mengetahui peralatan dan perlengkapan untuk mengumpulkan dan menampung cairan pada produk Cat.

Buang semua cairan sesuai peraturan setempat yang berlaku.



PERHATIAN

Pastikan semua suku cadang bersih dari kontaminan.

Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen.


  1. Gunakan Alat (A) untuk melepaskan filter oli engine.


    Ilustrasi 1g01096521

  2. Lepaskan baut (2) dan mur (4). Lepaskan susunan pipa (1).

  3. Lepaskan mur (5) dan baut (6). Lepaskan dudukan filter oli engine (3).

Caterpillar Information System:

C27 and C32 Generator Set Engines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C27 and C32 Tier 4 Engines Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
C27 and C32 Generator Set Engines Turbocharger - Install
C27 and C32 Generator Set Engines Turbocharger - Assemble
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines CID 0342 FMI 08 Secondary Engine Speed signal abnormal
2007/04/16 New Guidelines: When to Consult the Application Support Center (ASC) or the Dealer Solution Network (DSN) {1000}
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C27 and C32 Generator Set Engines CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C27 and C32 Engines for Caterpillar Built Machines CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C27 and C32 Generator Set Engines Turbocharger - Disassemble
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Filter Base - Install
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Air Inlet Heater Circuit - Test
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Cooler - Install
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C27 and C32 Generator Set Engines Camshaft
2005/02/28 New Sleeve Bearing in the Rocker Arm {1123}
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
D Series Excavator Monitoring System Setting Mode
C27 and C32 Industrial and Petroleum Engines Exhaust Manifold
Programming ECM Governor Gain Parameters{1264, 1901} Programming ECM Governor Gain Parameters{1264, 1901}
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.