Engine Overspeed Test Switch
Show/hide table
Illustration 1 | g00870743 |
Show/hide table
Engine Overspeed Test Switch (1) - Switch (1) is located on the lower right side of the front dash. The switch is used to test the alarms of an engine overspeed condition. Push the top of the switch in order to test the system. When the system is working properly, the engine overspeed indicator that is located on the upper left side of the dash will illuminate. Also, the overspeed alarm will sound at the same time. Release the switch in order to stop the test. |
Caterpillar Information System:
D8R Series II Track-Type Tractor Walk-Around Inspection
988G Wheel Loader Power Train Bypass Switch (Power Train Oil Filter)
2000/01/10 Field Returns Of The Lift Pressure Sensor and The Tilt Pressure Sensor Are Necessary for Failure Analysis and Product Improvement {7601}
621G Wheel Tractor-Scraper Steering Column Tilt and Telescope Control
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Calibration and Programming
966G Wheel Loader and 972G Wheel Loader Power Train Reverse High Speed Lockout - Program
621G Wheel Tractor-Scraper Steering Control
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Engagement Pressure for the Transmission Clutch - Calibrate
627G Wheel Tractor-Scraper Differential Lock Control
2000/01/24 Change to the Torque Specification for the Drive Shaft Bolts in Disassembly and Assembly Manuals, SENR6768 and SENR1217 {3253}
924G and 924GZ Wheel Loaders Power Train Differential - Assemble
3034 Engine for Caterpillar Built Machines Fuel Shutoff Solenoid
2000/02/14 The Track Rollers With Symmetric Duo-Cone Seals Have Been Improved {4180, 7561}
637G Wheel Tractor-Scraper General Information (Caterpillar Monitoring System)
2002/11/11 Support Literature Is Now Available For Maintaining Excavator Heating and Air Conditioning Systems {7309, 7320}
D8R Series II Track-Type Tractor After Starting Engine
3412E Engine for Caterpillar Built Machines Injector Solenoid Circuit - Test
637G Wheel Tractor-Scraper Functional Test (Caterpillar Monitoring System)
D6N Track-Type Tractor Power Train Track Roller - Remove
973C Track-Type Loader Engine Supplement Hydraulic Oil Cooler - Remove
988G Wheel Loader Power Train Relief Valve (Torque Converter Outlet)
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Relief Valve (Main) - Test and Adjust
988G Wheel Loader Power Train Modulating Valve (Torque Converter Lockup Clutch)
973C Track-Type Loader Engine Supplement Hydraulic Oil Cooler - Install