Fuel Shutoff Solenoid
Show/hide table
Illustration 1 | g00860958 |
Pull-in current ... 36.5 amperes
Hold-in current ... 1 ampere
Voltage ... 12 Volts
Show/hide table
Electrical Connector Identification     | |
Pull-in     | White     |
Hold-in     | Red     |
Ground     | Black     |
(1) Fuel shutoff solenoid
(2) Gasket
Ensure that the gasket is replaced during the installation of the fuel shutoff solenoid.
(3) Tighten the bolts that secure the fuel shutoff solenoid to the engine to the following torque. ... 9 N·m (80 lb in)
Caterpillar Information System:
988G Wheel Loader Power Train Pinout Specifications for Power Train Electronic Control
657G Wheel Tractor-Scraper Transmission Control
621G Wheel Tractor-Scraper Throttle Lock Control
924G and 924GZ Wheel Loaders Power Train Differential - Disassemble
924G and 924GZ Wheel Loaders Machine Systems Brake Control Valve (Service) - Remove and Install
D8R Series II Track-Type Tractor Stopping the Engine
627G Wheel Tractor-Scraper Governor Control
D7R Series II Track-Type Tractor Hydraulic System Implement Control Valve - Machines With a Winch
621G Wheel Tractor-Scraper Retarder Control
627G Wheel Tractor-Scraper Service Brake Control
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Pilot System Pressure - Test
D8R Series II Track-Type Tractor Leaving the Machine
924G and 924GZ Wheel Loaders Power Train Differential - Assemble
2000/01/24 Change to the Torque Specification for the Drive Shaft Bolts in Disassembly and Assembly Manuals, SENR6768 and SENR1217 {3253}
627G Wheel Tractor-Scraper Differential Lock Control
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Engagement Pressure for the Transmission Clutch - Calibrate
621G Wheel Tractor-Scraper Steering Control
966G Wheel Loader and 972G Wheel Loader Power Train Reverse High Speed Lockout - Program
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Calibration and Programming
621G Wheel Tractor-Scraper Steering Column Tilt and Telescope Control
2000/01/10 Field Returns Of The Lift Pressure Sensor and The Tilt Pressure Sensor Are Necessary for Failure Analysis and Product Improvement {7601}
988G Wheel Loader Power Train Bypass Switch (Power Train Oil Filter)
D8R Series II Track-Type Tractor Walk-Around Inspection
621G Wheel Tractor-Scraper Engine Overspeed Test Switch