3056 Engine for Caterpillar Built Machines Caterpillar

Installation Procedure

Show/hide table



Illustration 1	g00636666

1. Inspect the gaskets for wear or damage. If the gaskets are worn or damaged, use new parts for replacement.

2. Install air inlet manifold (1) with bolts (2). Tighten bolts (2) to a torque of 33 N·m (24 lb ft).

3. Put the gasket and elbow (4) in position on the air inlet manifold.

4. Install four bolts (5) that hold air inlet elbow (4) to air inlet manifold (1). Tighten bolts (5) to a torque of 22 N·m (16 lb ft).

5. Slide the hose into position and tighten hose clamps (3) .

6. Connect sensor (6) to the air inlet manifold.