C9 Engines for Caterpillar Built Machines Caterpillar


Inlet Air Temperature Sensor - Remove and Install

Usage:

TK711 101


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。





    图 1g01154354

  1. 从进气温度传感器 (2) 上断开线束组件 (1) 。

  1. 拆下进气温度传感器 (2) 。 从进气温度传感器 (2) 上拆下 O 型密封圈。

安装步骤




    图 2g01154354

    注: 检查 O 型密封圈有无磨损或损坏。 必要时更换 O 型密封圈。

  1. 在进气温度传感器 (2) 上安装 O 型密封圈。

  1. 安装进气温度传感器 (2) 。 拧紧进气温度传感器 (2) 到扭矩 20 ± 5 N·m (15 ± 4 lb ft)。

  1. 在进气温度传感器 (2) 上连接线束组件 (1) 。

Caterpillar Information System:

908 Compact Wheel Loader Hydraulic System Gear Motor (Fan)
908 Compact Wheel Loader Hydraulic System Pilot Valve (Joystick)
992G Wheel Loader and 854G Wheel Dozer Steering System Articulated Hitch
3056 Engine for Caterpillar Built Machines Air Inlet Manifold - Remove
3500 Generator Sets Voltage and Frequency - Check
3056 Engine for Caterpillar Built Machines Exhaust Manifold - Remove and Install
631E Series II, 633E Series II and 637E Series II Wheel Tractor Power Train General Testing and Adjusting Information
980G Wheel Loader Hydraulic System Position Sensor (Control Lever)
3056 Engine for Caterpillar Built Machines Turbocharger - Install
3056 Engine for Caterpillar Built Machines Lubrication System
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Payload Memory Capacity
C9 Engine For Caterpillar Built Machines Injection Actuation Pressure Sensor - Remove and Install
3056 Engine for Caterpillar Built Machines Air Inlet Manifold - Install
908 Compact Wheel Loader Hydraulic System Lift Cylinder
908 Compact Wheel Loader Hydraulic System Tilt Cylinder
908 Compact Wheel Loader Hydraulic System Coupler Cylinder
908 Compact Wheel Loader Hydraulic System Boom Linkage
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Calibration
924G and 924GZ Wheel Loaders Steering System Electric Drive Pump (Secondary Steering)
C9 Engine For Caterpillar Built Machines Front Cover - Remove
C9 Engine For Caterpillar Built Machines Front Cover - Install
3056 Engines Fuel Injection Pump
D10R, D11R and D11R Carrydozer Track-Type Tractors Implement Electronic Control System Sensors
515 and 525 Wheel SkiddersMachine Systems Sweeps - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.