Crankshaft Pulley - Remove and Install
Start By:
- Remove the fan drive belt. Refer to Disassembly and Assembly, "V Belts Remove and Install" for more information.
Show/hide table
Required Tools | |||
Tool | Part Number | Description | Qty |
A | 8S-2264 | Puller Group | 1 |
6V-3668 | Bolt | 3 |
- Remove the nut (5) and the washer (3) from the crankshaft pulley (2).
Show/hide table
Illustration 2 g00827241 - Install tool (A). Use tool (A) in order to remove the crankshaft pulley (2) from the crankshaft (4).
- Remove the woodruff key (1) from the crankshaft (4).
Show/hide table
Illustration 1 | g00827213 |
- Install the woodruff key (1) to the crankshaft (4).
- Install the crankshaft pulley (2) to the crankshaft (4).
- Install the washer (3) to the crankshaft (4).
- Lubricate the nut (5) with clean engine oil and install the nut.
For C0.5 and C0.7 engines, tighten the nut (5) to a torque of
93 N·m (69 lb ft) .For C1.1/3011C and C1.6 engines, tighten the nut (5) to a torque of
123 N·m (91 lb ft) .For C1.5/3013C, C2.2/3024C and C2.2/3024CT engines, tighten the nut (5) to a torque of
304 N·m (224 lb ft) .
Show/hide table
Illustration 3 | g00827213 |
Note: Inspect the following components for damage: the taper of the crankshaft, the woodruff key and the bore of the crankshaft pulley. Replace any components that are damaged. Ensure that the taper of the crankshaft and the bore of the crankshaft pulley are clean and dry before assembly.
End By:
- Install the V-belt to the engine. Refer to Disassembly and Assembly, "V Belts Remove and Install".
Caterpillar Information System:
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Pump - Remove
2004/12/01 Lifting Brackets and Hardware are Available {1122}
Installation of 262-6141 Alarm Gp {7406} Installation of 262-6141 Alarm Gp {7406}
374F Excavator Belt - Inspect/Adjust/Replace
345C Excavator Machine System Specifications Stick - 3.0 m (9.84 ft)
345C Excavator Machine System Specifications Stick
345C Excavator Machine System Specifications Stick
3500 and 3500B Engines Reference Numbers
C6.6 Industrial Engine Model View Illustrations
3126B Petroleum Engine Injection Actuation Pressure - Test
G3520C and G3520E Generator Set Engines Fuel Control Valve - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Lubrication System
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3508C, 3512C and 3516C Marine Engines Piston Cooling Jets - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Lines - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Pump - Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Nozzles - Remove
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
345C Excavator Machine System Specifications Stick - 3.4 m (11.16 ft)
3408C and 3412C Marine Auxiliary and Marine Generator Set Engines Refill Capacities and Recommendations
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Lifter Group
2004/12/01 The Engine Oil Recommendation for 3500 Series Diesel Engines has Changed {1300}
C32 Marine Engines Diagnostic Code Cross Reference
390F MHPU Mobile Hydraulic Power Unit Engine Crankcase Breather - Clean