Belt - Inspect/Adjust/Replace
Poznámka Tento motor je vybavený napínacím mechanismem řemene, který automaticky upravuje správné napnutí řemene.
- Uvolněte západku a zvedněte kapotu motoru.
- Zkontrolujte řemen na opotřebení a popraskání.
- Pokud řemen vyžaduje výměnu, proveďte krok 3.a až krok3.c.
- Otáčejte napínačem řemene pro uvolnění řemene.
- Sejměte řemen.
- Nasaďte nový řemen.
Poznámka Postup výměny řemenu naleznete v příručce Demontáž a montáž, "Řemen - demontáž a montáž".
Show/hide table
Ilustrace 1 g01127241 - Zavřete kapotu motoru.
Caterpillar Information System:
345C Excavator Machine System Specifications Stick - 3.0 m (9.84 ft)
345C Excavator Machine System Specifications Stick
345C Excavator Machine System Specifications Stick
3500 and 3500B Engines Reference Numbers
C6.6 Industrial Engine Model View Illustrations
3126B Petroleum Engine Injection Actuation Pressure - Test
G3520C and G3520E Generator Set Engines Fuel Control Valve - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Lubrication System
C11 and C13 Engines for Caterpillar Built Machines General Information
C4.4 Industrial Engine Electrical System
C7.1 Industrial Engine Engine Stopping
2004/12/01 New Lockwasher Will Improve Varistor Reliability {4466}
Installation of 262-6141 Alarm Gp {7406} Installation of 262-6141 Alarm Gp {7406}
2004/12/01 Lifting Brackets and Hardware are Available {1122}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Pump - Remove
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Crankshaft Pulley - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3508C, 3512C and 3516C Marine Engines Piston Cooling Jets - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Lines - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Pump - Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Nozzles - Remove
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
345C Excavator Machine System Specifications Stick - 3.4 m (11.16 ft)
3408C and 3412C Marine Auxiliary and Marine Generator Set Engines Refill Capacities and Recommendations