Equalizer Bar - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 140-7742     | Protective Sleeve     | 1     |
B     | 6V-3009     | Crossbar     | 4     |
4M-2442 | Bolt     | 4     | |
2M-0849 | Washer     | 20     | |
C     | 5P-6215     | Jack Stands     | 2     |
- Use Tooling (A), straps and a suitable lifting device in order to support equalizer bar (1). Install Tooling (B) in order to hold equalizer bar pads (2) into position while you install the equalizer bar.
Show/hide table
Illustration 1 | g00707461 |
Show/hide table
Illustration 2 | g00578034 |
- Install pin (6) and bolt (5) .
Show/hide table
Illustration 3 | g00578048 |
- Install pin (4) and bolt (3) .
Show/hide table
Illustration 4 | g00578039 |
End By: Install the track roller frame. Refer to Disassembly and Assembly, "Track Roller Frame - Install" for the correct procedure.
Caterpillar Information System:
3408E and 3412E Engines for Caterpillar Built Machines Air in Fuel - Test
3034 Engine for Caterpillar Built Machines Crankshaft Front Seal - Install
3408E and 3412E Engines for Caterpillar Built Machines Turbocharger - Remove
3408E and 3412E Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
615C Series II Wheel Tractor-Scraper Transmission Neutral Lock Control
613C Series II Wheel Tractor-Scraper Elevator Control
613C Series II Wheel Tractor-Scraper Ejector Control
613C Series II Wheel Tractor-Scraper Bowl Control
615C Series II Wheel Tractor-Scraper Transmission Control
963C Track-Type Loader Power Train Track Roller Frame - Install
D6R Series II Track-Type Tractor Hydraulic System Oil Cooler and Bypass Valve
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
3406E On-Highway Engine Connecting Rod Bearings - Remove
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Fuel Filter Base
938G Wheel Loader and IT38G Integrated Toolcarrier Belts - Inspect/Adjust/Replace
988G Wheel Loader Power Train NoSPIN Differential
3406E On-Highway Engine Connecting Rod Bearings - Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
994D Wheel Loader Engine Supplement Alternator - Remove and Install
615C Wheel Tractor-Scraper Wheel Tractor-Scraper Power Train Differential and Bevel Gear - Adjust
3408E and 3412E Engines for Caterpillar Built Machines Turbocharger - Install
3406E On-Highway Engine Crankshaft Main Bearings - Install
994D Wheel Loader Engine Supplement Engine Electronic Control Module - Remove and Install
994D Wheel Loader Engine Supplement Fuel Priming Pump - Remove and Install