Injection Actuation Pressure Control Valve - Disassemble
开始:
- 拆下喷油作动压力控制阀。 请参阅拆解和组装, "喷油作动压力控制阀 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
Show/hide table
注意 |
---|
不要让脏物进入燃油系统。 彻底清洁将要拆开的燃油系统部件的周围区域。 在拆开的燃油系统部件上安放适当的盖。 |
Show/hide table
注意 |
---|
如果螺塞上的 O 形密封圈需要更换,仅应拆下喷油作动压力控制阀的缸体组件和补偿器中的螺塞。 螺塞拆下后,缸体组件也需彻底清洁。 喷油作动压力控制阀和阀组件部件的拆解可导致喷油作动压力控制阀不对准。 |
- 从喷油作动压力控制阀缸体组件 (2) 上拆下四个 O 形密封圈 (4)。
- 如有必要,从补偿器 (1) 上拆下两个螺塞 (3)。
Show/hide table
图 2 g00601325 - 拆下四个 O 形密封圈 (5)。
- 如有必要,从补偿器上拆下螺塞 (6)。
Show/hide table
图 3 g00601329 - 如有必要,从缸体组件上拆下两个螺塞 (7)。
- 如有必要,从缸体组件上拆下螺塞 (8)。
Show/hide table
图 4 g00601330 - 如有必要,从喷油作动压力控制阀 (9) 上拆下螺母 (11) 和隔套 (10)。
- 如有必要,拆下电磁阀 (9)。
Show/hide table
图 1 | g00601324 |
Caterpillar Information System:
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Fuel Injection Control Linkage
3408E and 3412E Engines for Caterpillar Built Machines Injection Actuation Pressure Control Valve - Install
994D Wheel Loader Engine Supplement Air Cleaner - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Injection Actuation Pressure Control Valve - Remove
613C Series II Wheel Tractor-Scraper Parking and Secondary Brake Control
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Governor
611 Wheel Tractor-Scraper Air System and Brakes Air Compressor Governor - Test and Adjust
3508B Engine for Caterpillar Built Machines Turbocharger Exhaust Temperature Sensor
611 Wheel Tractor-Scraper Wheel Tractor-Scraper Power Train Final Drive
611 Wheel Tractor-Scraper Wheel Tractor-Scraper Power Train Differential Lock
615C Wheel Tractor-Scraper Wheel Tractor-Scraper Power Train Differential and Bevel Gear
525B Wheel Skidder, 535B Wheel Skidder and 545 Wheel Skidder Grapple Bank Valve (Four) (Grapple)
D6R Track-Type Tractor Safety Signs and Labels
3176C and 3196 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
611 Wheel Tractor-Scraper Wheel Tractor-Scraper Power Train Visual Inspection
3034 Engine for Caterpillar Built Machines Alternator - Remove and Install
988G Wheel Loader Bucket Wear Plates - Inspect/Replace
D7R Series II Track-Type Tractor Hydraulic System Implement Control Valve
3408E and 3412E Engines for Caterpillar Built Machines Injection Actuation Pressure Control Valve - Assemble
3034 Engine for Caterpillar Built Machines Electric Starting Motor - Remove and Install
966G and 972G Wheel Loaders Equipment Lowering with Engine Stopped
3034 Engine for Caterpillar Built Machines Crankshaft Pulley - Remove and Install
3034 Engine for Caterpillar Built Machines Crankshaft Front Seal - Remove
994D Wheel Loader Engine Supplement Air Starting Motor - Remove and Install