CID 0042 FMI 06 Injector Actuation Valve short to ground
产生此代码的情况:
电子控制模块(ECM)检测到喷油作动压力控制阀(IAPCV)电路中电流过大。
系统响应:
诊断代码可在显示模块或 Caterpillar 电子技师(ET)上查看。
- 发动机缺火
- 功率过低
- 降低的发动机转速(rpm)
- 发动机停机
测试步骤 1. 进行以下的诊断步骤: 喷油作动压力控制阀电路 - 测试
结果:
- 正常 - 停止
Caterpillar Information System:
C-10 Petroleum Engine Cooling System
C9 Engine for Caterpillar Built Machines CID 0042 FMI 05 Injector Actuation Valve open circuit
3600 to 3600 Electronic Unit Injector (EUI) Upgrade{1000, 1250} 3600 to 3600 Electronic Unit Injector (EUI) Upgrade{1000, 1250}
G3524 and G3532 Tandem Maintenance{7002} G3524 and G3532 Tandem Maintenance{7002}
2004/11/01 Installation of the 114-9522 Resistor (Generator Bearing RTD) {5574}
2004/11/01 Circuit Breakers - Steps to Consider When Resetting {1420}
2005/02/28 A Wiring Harness Adapter for the Fuel Valve Is Now Available {1254, 1408}
3512B and 3516B Engines Cylinder Liner - Install
2004/12/01 Improved Gear Carrier {1205}
3500 Engines Cylinder Liner - Remove
2004/11/01 Improved Mounting of the Power Distribution Box {7426}
365B Excavators Hydraulic System Swing Bearing Movement - Measure
C-10 Petroleum Engine Finding Top Center Position for No. 1 Piston
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Filter Base
C-10 Petroleum Engine Fuel System - Prime
3412E Petroleum Engine Finding Top Center Position for No. 1 Piston
325D and 329D Excavators Hydraulic System Oil Level - Check
C-10 Petroleum Engine Inlet Manifold Pressure - Test
325D and 329D Excavators Hydraulic System Oil Filter (Return) - Replace
C-10 Petroleum Engine Cooling System - Check - Overheating
C-10 Petroleum Engine Cooling System - Test
2004/12/01 The Internet Address for Authorized Delphi Dealers {1250, 1251}
349F and 352F Excavators Machine System Specifications Bucket Linkage - VB Family
C-10 Petroleum Engine Vibration Damper - Check