2004/11/01 Caterpillar


Installation of the 114-9522 Resistor (Generator Bearing RTD) {5574}

Usage:

G3516 4EK
Engine:
G3512 (S/N: 7NJ135-497)
G3516 (S/N: 4EK904-2221)
G3524 (S/N: 7SZ207-221)
G3532 (S/N: 8BZ304-386)

The Generator Bearing Temperature Detectors (114-9522 Resistor ) must be installed using the included O-ring. This O-ring will allow for the adjusting of the insertion depth if required. If the 114-9522 Resistor comes with a ferrule, the ferrule must be discarded.

Caterpillar Information System:

2004/11/01 Circuit Breakers - Steps to Consider When Resetting {1420}
2005/02/28 A Wiring Harness Adapter for the Fuel Valve Is Now Available {1254, 1408}
3512B and 3516B Engines Cylinder Liner - Install
2004/12/01 Improved Gear Carrier {1205}
3500 Engines Cylinder Liner - Remove
2004/11/01 Improved Mounting of the Power Distribution Box {7426}
365B Excavators Hydraulic System Swing Bearing Movement - Measure
C11 and C13 Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
C-10 Petroleum Engine Air Inlet and Exhaust System
345B Excavator Hydraulic System Swing Bearing Movement - Measure
3412E Petroleum Engine Flywheel Housing
C11 and C13 Engines for Caterpillar Built Machines User Defined Shutdown Input Circuit - Test
G3524 and G3532 Tandem Maintenance{7002} G3524 and G3532 Tandem Maintenance{7002}
3600 to 3600 Electronic Unit Injector (EUI) Upgrade{1000, 1250} 3600 to 3600 Electronic Unit Injector (EUI) Upgrade{1000, 1250}
C9 Engine for Caterpillar Built Machines CID 0042 FMI 05 Injector Actuation Valve open circuit
C-10 Petroleum Engine Cooling System
C9 Engine for Caterpillar Built Machines CID 0042 FMI 06 Injector Actuation Valve short to ground
C-10 Petroleum Engine Finding Top Center Position for No. 1 Piston
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Filter Base
C-10 Petroleum Engine Fuel System - Prime
3412E Petroleum Engine Finding Top Center Position for No. 1 Piston
325D and 329D Excavators Hydraulic System Oil Level - Check
C-10 Petroleum Engine Inlet Manifold Pressure - Test
325D and 329D Excavators Hydraulic System Oil Filter (Return) - Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.