Cylinder Liner - Remove
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 5P-8665 | 缸套拉拔器 | 1 |
开始:
- 拆卸活塞和连杆组件。 请参阅拆解和组装, "活塞和连杆 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 使用工具 (A) 拆卸缸套 (1)。
Show/hide table
图 2 g01004993 - 从缸套 (1) 上拆卸 O 形密封圈 (3) 和加注口带箍 (2)。
Show/hide table
图 1 | g01120797 |
Caterpillar Information System:
2004/11/01 Improved Mounting of the Power Distribution Box {7426}
365B Excavators Hydraulic System Swing Bearing Movement - Measure
C11 and C13 Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
C-10 Petroleum Engine Air Inlet and Exhaust System
345B Excavator Hydraulic System Swing Bearing Movement - Measure
3412E Petroleum Engine Flywheel Housing
C11 and C13 Engines for Caterpillar Built Machines User Defined Shutdown Input Circuit - Test
3508B, 3512B and 3516B Generator Set Engines Cylinder Head - Remove
C11 and C13 On-Highway Engines Air Lines
C11 and C13 Petroleum Engines Air Lines
C11 and C13 On-Highway Engines Air Lines
C11 and C13 On-Highway Engines Air Lines
2004/12/01 Improved Gear Carrier {1205}
3512B and 3516B Engines Cylinder Liner - Install
2005/02/28 A Wiring Harness Adapter for the Fuel Valve Is Now Available {1254, 1408}
2004/11/01 Circuit Breakers - Steps to Consider When Resetting {1420}
2004/11/01 Installation of the 114-9522 Resistor (Generator Bearing RTD) {5574}
G3524 and G3532 Tandem Maintenance{7002} G3524 and G3532 Tandem Maintenance{7002}
3600 to 3600 Electronic Unit Injector (EUI) Upgrade{1000, 1250} 3600 to 3600 Electronic Unit Injector (EUI) Upgrade{1000, 1250}
C9 Engine for Caterpillar Built Machines CID 0042 FMI 05 Injector Actuation Valve open circuit
C-10 Petroleum Engine Cooling System
C9 Engine for Caterpillar Built Machines CID 0042 FMI 06 Injector Actuation Valve short to ground
C-10 Petroleum Engine Finding Top Center Position for No. 1 Piston
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Filter Base