A Wiring Harness Adapter for the Fuel Valve Is Now Available {1254, 1408}
- Engine:
- G3512 (S/N: 9FP1-UP)
- Generator Set:
- G3516 (S/N: CSC1-UP; CSZ1-UP; ZBA1-UP)
- G3516 (S/N: 7EZ1-UP)
- G3520 (S/N: 5XW1-UP)
Description of Change: A wiring harness adapter is now available to connect to the new Tecjet 50+ fuel valve. When you replace a Tecjet 50 fuel valve with the new Tecjet 50+ fuel valve, the existing wiring harness will not connect to the new Tecjet 50+ fuel valve.
Adaptable To: The 260-6907 Fuel Harness Assembly is required when you replace the 169-6572 Fuel Valve Gp with the 239-5791 Fuel Valve Gp .
The wiring harness adapter is not shipped with the 239-5791 Fuel Valve Gp. The wiring harness adapter must be separately ordered.
Caterpillar Information System:
3512B and 3516B Engines Cylinder Liner - Install
2004/12/01 Improved Gear Carrier {1205}
3500 Engines Cylinder Liner - Remove
2004/11/01 Improved Mounting of the Power Distribution Box {7426}
365B Excavators Hydraulic System Swing Bearing Movement - Measure
C11 and C13 Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
C-10 Petroleum Engine Air Inlet and Exhaust System
345B Excavator Hydraulic System Swing Bearing Movement - Measure
3412E Petroleum Engine Flywheel Housing
C11 and C13 Engines for Caterpillar Built Machines User Defined Shutdown Input Circuit - Test
3508B, 3512B and 3516B Generator Set Engines Cylinder Head - Remove
C11 and C13 On-Highway Engines Air Lines
2004/11/01 Circuit Breakers - Steps to Consider When Resetting {1420}
2004/11/01 Installation of the 114-9522 Resistor (Generator Bearing RTD) {5574}
G3524 and G3532 Tandem Maintenance{7002} G3524 and G3532 Tandem Maintenance{7002}
3600 to 3600 Electronic Unit Injector (EUI) Upgrade{1000, 1250} 3600 to 3600 Electronic Unit Injector (EUI) Upgrade{1000, 1250}
C9 Engine for Caterpillar Built Machines CID 0042 FMI 05 Injector Actuation Valve open circuit
C-10 Petroleum Engine Cooling System
C9 Engine for Caterpillar Built Machines CID 0042 FMI 06 Injector Actuation Valve short to ground
C-10 Petroleum Engine Finding Top Center Position for No. 1 Piston
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Filter Base
C-10 Petroleum Engine Fuel System - Prime
3412E Petroleum Engine Finding Top Center Position for No. 1 Piston
325D and 329D Excavators Hydraulic System Oil Level - Check