2004/12/01 Caterpillar


Improved Gear Carrier {1205}

Usage:

3608 6MC
Engine:
3608 (S/N: 6MC1-UP)
3612 (S/N: 9RC1-UP)

Description of Change: An improved gear carrier is now available. The new gear carrier is a solid design for increased strength and increased service life.

The gear carrier is used on engines when the flywheel and the driven equipment is attached to the front of the engine and the damper is attached to the rear of the engine. The damper group that is rear mounted contains the gear carrier. This allows the engine to be started with the starters that are mounted in the conventional location at the rear of the engine.

Adaptable To: The former 7E-8330 Gear Carrier is cancelled and replaced by the new 258-6581 Gear Carrier. The gear carrier is part of the 7E-8347 Damper Gp. The new gear carrier is effective with the serial numbers that are listed in Table 1.

Table 1
Effective Serial Numbers    
S/N:6MC00721-UP    
S/N:9RC00430-UP    

Caterpillar Information System:

3500 Engines Cylinder Liner - Remove
2004/11/01 Improved Mounting of the Power Distribution Box {7426}
365B Excavators Hydraulic System Swing Bearing Movement - Measure
C11 and C13 Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
C-10 Petroleum Engine Air Inlet and Exhaust System
345B Excavator Hydraulic System Swing Bearing Movement - Measure
3412E Petroleum Engine Flywheel Housing
C11 and C13 Engines for Caterpillar Built Machines User Defined Shutdown Input Circuit - Test
3508B, 3512B and 3516B Generator Set Engines Cylinder Head - Remove
C11 and C13 On-Highway Engines Air Lines
C11 and C13 Petroleum Engines Air Lines
C11 and C13 On-Highway Engines Air Lines
3512B and 3516B Engines Cylinder Liner - Install
2005/02/28 A Wiring Harness Adapter for the Fuel Valve Is Now Available {1254, 1408}
2004/11/01 Circuit Breakers - Steps to Consider When Resetting {1420}
2004/11/01 Installation of the 114-9522 Resistor (Generator Bearing RTD) {5574}
G3524 and G3532 Tandem Maintenance{7002} G3524 and G3532 Tandem Maintenance{7002}
3600 to 3600 Electronic Unit Injector (EUI) Upgrade{1000, 1250} 3600 to 3600 Electronic Unit Injector (EUI) Upgrade{1000, 1250}
C9 Engine for Caterpillar Built Machines CID 0042 FMI 05 Injector Actuation Valve open circuit
C-10 Petroleum Engine Cooling System
C9 Engine for Caterpillar Built Machines CID 0042 FMI 06 Injector Actuation Valve short to ground
C-10 Petroleum Engine Finding Top Center Position for No. 1 Piston
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Filter Base
C-10 Petroleum Engine Fuel System - Prime
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.