Bucket Linkage - VB Family
Show/hide table
图 1 | g01446537 |
注: 转动铲斗油缸连杆端并远离斗杆定位黄油嘴来在机器上组装此连杆。 所有孔必须没有油漆。 使用 5P-0960 油脂筒罐 涂抹所有销孔。
Show/hide table
图 2 | g01446540 |
A-A 视图 |
(1) 4I-6718 套筒轴承
- 数量 ... 2
- 外径 ... 130.240 ± 0.013 mm (5.1275 ± 0.0005 in)
- 内径 ... 110.300 ± 0.020 mm (4.3425 ± 0.0008 in)
- 套筒轴承的安装深度 ... 9.65 ± 0.80 mm (0.380 ± 0.031 in)
- 外径 ... 130.240 ± 0.013 mm (5.1275 ± 0.0005 in)
(2) 在要密封的六个唇型密封件密封唇上稍涂润滑剂。 安装防尘密封,使唇口朝向外侧。 安装六个唇形密封件,使唇形密封件密封唇不超出凸台端面。
(3) 212-3090 销组件
- 销直径 ... 109.85 ± 0.04 mm (4.325 ± 0.002 in)
(4) 4I-6718 套筒轴承
- 数量 ... 2
- 外径 ... 130.240 ± 0.013 mm (5.1275 ± 0.0005 in)
- 内径 ... 110.300 ± 0.020 mm (4.3425 ± 0.0008 in)
- 套筒轴承的安装深度 ... 9.50 ± 0.80 mm (0.374 ± 0.031 in)
- 外径 ... 130.240 ± 0.013 mm (5.1275 ± 0.0005 in)
(5) 212-3088 销组件
- 销直径 ... 109.85 ± 0.04 mm (4.325 ± 0.002 in)
(6) 212-3086 销组件
- 销直径 ... 119.85 ± 0.04 mm (4.718 ± 0.002 in)
Show/hide table
图 3 | g01446541 |
剖面 B-B |
(7) 212-3092 销组件
- 销直径 ... 79.85 ± 0.04 mm (3.144 ± 0.002 in)
Caterpillar Information System:
2004/12/01 The Internet Address for Authorized Delphi Dealers {1250, 1251}
C-10 Petroleum Engine Cooling System - Test
C-10 Petroleum Engine Cooling System - Check - Overheating
325D and 329D Excavators Hydraulic System Oil Filter (Return) - Replace
C-10 Petroleum Engine Inlet Manifold Pressure - Test
325D and 329D Excavators Hydraulic System Oil Level - Check
3412E Petroleum Engine Finding Top Center Position for No. 1 Piston
C-10 Petroleum Engine Fuel System - Prime
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Filter Base
C-10 Petroleum Engine Finding Top Center Position for No. 1 Piston
C9 Engine for Caterpillar Built Machines CID 0042 FMI 06 Injector Actuation Valve short to ground
C-10 Petroleum Engine Cooling System
C-10 Petroleum Engine Vibration Damper - Check
C-10 Petroleum Engine Fuel System Pressure - Test
3512B and 3516B Engines Camshaft - Remove
3508B, 3512B and 3516B Generator Set Engines Camshaft - Install
3412E Petroleum Engine Electronic Control System Components
345D, 349D and 349D2 Excavators Hydraulic System Relief Valve (Main) - Test and Adjust - Heavy Lift
C11 and C13 Engines for Caterpillar Built Machines Cooling System
C11 and C13 Engines for Caterpillar Built Machines Fuel System - Prime
3412E Petroleum Engine Electrical System
C13, C15, and C18 Tier 4 Final Engines Camshaft
3412E Petroleum Engine Battery - Test
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Model View Illustrations