Differential Pinion - Remove
Removal Procedure
Show/hide table
Tool     | Part Number     | Part Description     | Qty     |
---|---|---|---|
A     | 138-7575     | Link Bracket     | 2     |
Start By:
- Remove the service brakes. Refer to Disassembly and Assembly, "Service Brake - Remove and Install".
- Remove two bolts (1) from the pinion housing. The bolts are located on either side of holes (2) .
Show/hide table
Illustration 1 | g00601457 |
Typical Example |
- Install two guide bolts that are approximately 152 mm (6 inch) long into the bolt holes.
- Remove the remaining bolts (1) from the pinion housing.
- Slide the pinion housing away from the differential housing. Forcing bolts may be used in holes (2) in order to separate the pinion housing from the differential housing.
- Install Tooling (A) into holes (2), as shown.
Show/hide table
Illustration 2 | g00601462 |
Typical Example |
- Support the pinion gear assembly with a hoist and a suitable lifting device. Remove the pinion gear assembly from the axle. The weight of the pinion housing is 68.0 kg (150 lb).
Caterpillar Information System:
D11R Carrydozer Track-Type Tractor Ripper Shank - Remove and Install
D11R Track-Type Tractor Machine Systems Ripper Shank - Remove and Install
D11R Carrydozer Track-Type Tractor Pitch Regenerate Solenoid Valve - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Turbocharger - Disassemble
D11R Carrydozer Track-Type Tractor Pitch Regenerate Solenoid Valve - Disassemble
D11R Carrydozer Track-Type Tractor Pitch Regenerate Solenoid Valve - Install
D11R Carrydozer Track-Type Tractor Pitch Regenerate Solenoid Valve - Remove
988G Wheel Loader Window Wiper - Inspect/Replace
834G Wheel Tractor and 836G Landfill Compactor Steering System Steering Pilot System
836G Landfill Compactor and 834G Wheel Dozer Belts - Inspect/Adjust/Replace
SR4 HV and SR4B HV Generators Varistor - Test
3306C Engines for Caterpillar Built Machines Alternator and Regulator
545 Wheel Skidder Power Train Solenoid Valve (Differential Lock)
3408E and 3412E Engines for Caterpillar Built Machines Turbocharger - Assemble
988G Wheel Loader Braking System Parking Brake - Manual Release
988G Wheel Loader Steering System Pilot Valve (STIC Steering)
3406E and 3456 Engines for Caterpillar Built Machines Turbocharger - Install
988G Wheel Loader Loader Pins and Bearings - Lubricate
545 Wheel Skidder Power Train Axle Housing - Disassemble
322B, 322B L, 325B and 325B L Excavators Travel Control - Straight Travel Pedal (If Equipped)
988G Wheel Loader Braking System Parking Brake - Test
988G Wheel Loader Braking System Parking Brake Control Cable - Adjust
988G Wheel Loader Bucket Rated Load
988G Wheel Loader Steering System Steering Neutralizer Valve