Ejector - Remove
Removal Procedure
Start By:
- Remove the elevator. Refer to Disassembly and Assembly, "Elevator - Remove". The information is in this manual.
- Move the ejector to the front of the scraper bowl.
- Attach a nylon lifting strap and a hoist to the ejector cylinder. Remove two bolts (1) and bar (2) from the ejector. Use a hammer and a brass rod to remove pin (4) from the ejector. Carefully lower and slowly lower the ejector cylinder to the scraper bowl.
Show/hide table
Illustration 1 | g00489788 |
- Attach a lifting chain and a hoist to the ejector. Move the ejector toward the front of the scraper bowl in order to remove the ejector guide roller from the track assembly. Remove the ejector from the scraper bowl. The ejector weighs 795 kg (1753 lb) .
Show/hide table
Illustration 2 | g00489789 |
Caterpillar Information System:
615C Series II Wheel Tractor-Scraper Machine Systems Elevator Drive - Install
615C Series II Wheel Tractor-Scraper Machine Systems Elevator Drive - Remove
611 Wheel Tractor-Scraper 3306B Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
D6R Track-Type Tractor Power Train Power Train Oil Cooler
D8R Track-Type Tractor Hydraulic System Steering Pump
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Parameters
D8R Track-Type Tractor Hydraulic System Steering Motor
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Warning Operation
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Pump (Hydrostatic) - Disassemble
D6R Track-Type Tractor Power Train Electronic Control System Components
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Steering and Brake Manifold Valve - Test
D8R Track-Type Tractor Hydraulic System Steering Pilot Valve
615C Series II Wheel Tractor-Scraper Machine Systems Ejector - Install
615C Series II Wheel Tractor-Scraper Machine Systems Floor Dump Arm - Remove and Install
3406C Engines for Caterpillar Built Machines Camshaft
615C Series II Wheel Tractor-Scraper Machine Systems Ejector Cylinder - Remove and Install
615C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Remove
615C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Install
615C Series II Wheel Tractor-Scraper Machine Systems Floor - Remove and Install
615C Series II Wheel Tractor-Scraper Machine Systems Ejector Guide Roller - Remove
615C Series II Wheel Tractor-Scraper Machine Systems Ejector Guide Roller - Install
615C Series II Wheel Tractor-Scraper Machine Systems Hitch - Remove
615C Series II Wheel Tractor-Scraper Machine Systems Hitch - Install
D7R Track-Type TractorPower Train Transmission Oil Filter