Elevator Drive - Install
Installation Procedure
- Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
- Install the elevator drive to the elevator. The elevator drive weighs 420 kg (925 lb). Install bracket (4) and two bolts (3) to the elevator. Use a soft faced hammer to install pin (2) to the elevator. Install bolt (1) to the elevator. Remove the tooling from the elevator drive.
Show/hide table
 | |
| Illustration 1 | g00490021 |
End By:
- Install the elevator chain and flights. Refer to Disassembly and Assembly, "Elevator Chain and Flights - Install". The information is in this manual.
- Install the elevator motor. Refer to Disassembly and Assembly, "Elevator Motor - Install". The information is in this manual.
Caterpillar Information System:
615C Series II Wheel Tractor-Scraper Machine Systems Elevator Drive - Remove
611 Wheel Tractor-Scraper 3306B Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
D6R Track-Type Tractor Power Train Power Train Oil Cooler
D8R Track-Type Tractor Hydraulic System Steering Pump
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Parameters
D8R Track-Type Tractor Hydraulic System Steering Motor
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Warning Operation
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Pump (Hydrostatic) - Disassemble
D6R Track-Type Tractor Power Train Electronic Control System Components
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Steering and Brake Manifold Valve - Test
D8R Track-Type Tractor Hydraulic System Steering Pilot Valve
D8R Series II Track-Type Tractor Hydraulic System Hydraulic Oil Cooler
615C Series II Wheel Tractor-Scraper Machine Systems Ejector - Remove
615C Series II Wheel Tractor-Scraper Machine Systems Ejector - Install
615C Series II Wheel Tractor-Scraper Machine Systems Floor Dump Arm - Remove and Install
3406C Engines for Caterpillar Built Machines Camshaft
615C Series II Wheel Tractor-Scraper Machine Systems Ejector Cylinder - Remove and Install
615C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Remove
615C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Install
615C Series II Wheel Tractor-Scraper Machine Systems Floor - Remove and Install
615C Series II Wheel Tractor-Scraper Machine Systems Ejector Guide Roller - Remove
615C Series II Wheel Tractor-Scraper Machine Systems Ejector Guide Roller - Install
615C Series II Wheel Tractor-Scraper Machine Systems Hitch - Remove
615C Series II Wheel Tractor-Scraper Machine Systems Hitch - Install